Round steel tube galvanized Ø42,4 mm

Round pipe galvanized D=21.3mm wall thickness 2.0 mm
maximum profile length 6 m
Maximum length for shipping with the courier is 2 meters!

Three-way angle clamp. Corner connection 90°, used to form the upper corners of structures.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Square base plate clamp. The square base plate allows it to be attached to a surface at a 90° angle.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Short T-clamp. Ensures a cross connection between two pipes. This fitting cannot be used to connect two horizontal pipes inside a pipe clamp.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.

Short Slope Tee Variable angle 0° - 11°. Top fitting for up to 11° uprights. This fitting can not be used to join horizontal tube within the fitting.