Round steel tube galvanized Ø42,4 mm

Round tube D=48.3mm
wall thickness 2.9 mm
powder coated yellow
maximum profile length 3 m

Plastic cap for tube 25X25 mm
black
Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Short T-clamp. Ensures a cross connection between two pipes. This fitting cannot be used to connect two horizontal pipes inside a pipe clamp.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Black, ring clip.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Internal extension clamp. To continue two pipes of the same diameter. The wall thickness of the pipe must be at least 3.2 mm. Do not use for high vertical loads.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Short T-clamp 45°. Connects horizontal and vertical pipes at a 45° angle. The clamp is made of hot-dip galvanized malleable iron, durable, corrosion-resistant and long-lasting. Meets TÜV requirements.