Ramp 500x1000xH0-100mm

- dimensions: 1830x300xH55mm
- material: rubber
- 2 cable channels: 30x30mm
- threshold modules can be connected to each other
- traffic calming on roads with speed limits of 10 to 25 km/h, such as in residential areas, industrial zones, parking lots, around schools, etc.
- can also be used for cable protection and wall protection

Rubber speed bump is wear-resistant and durable
Maximum recommended crossing speed 20 km / h
Installation: on asphalt or concrete, not suitable for gravel roads

Material: vulcanized rubber

Dimensions:
end element 400x200x50mm
middle element 400x500x50mm

Installation accessories not included:
Product code: 13159FP

The flat traffic threshold, or Berlin threshold, is ideal for places where low speeds are required, it also allows large vehicles to travel smoothly. The threshold attracts attention and increases safety and speed reduction (up to 30 km/h).

– consists of four modules
– Dimensions: 2000x1800x65 mm
– Material: vulcanised rubber (hard-wearing, UV-protected)
– Color: red
– Reflective arrows (3M class 2) and 4 cover-reflectors
– Maximum overtaking speed: 30 km/h
– Use glue for stronger fastening (not included in the set)
– Suitable in temperatures between -40°C and +60°C
– Easily installable
– Good value for money
– Weight: 240 kg

Rubber rump – made of EPDM rubber reinforced with a cord. Ideal for use as a driveway to high curbs. It can be mounted to the pavement using mounting hardware both can be used as a
temporary element. The rump has a cable duct that does not interfere with the assembly of the rump in places where various types of cables are laid.

Sizes:
- Material: EPDM
- Length: 600mm
- Width: 360 mm
- Height: 150 mm
- Cable holes: 50x50mm, 30x40mm, 20x20mm
- Weight: 16,5 kg

Wide speed bump
Material: rubber, wear-resistant and durable
Maximum recommended crossing speed 20 km / h
Installation: on asphalt or concrete; not suitable for gravel roads

Element dimensions:
end 435x895x50mm
middle 495x895x50 mm

Installation accessories not included:
Product code: 13159FP

Ideal for use as a driveway to high curbs. It can be mounted to the pavement using mounting hardware both can be used as a temporary element.
The rump has a cable duct that does not interfere with the assembly of the rump in places where various types of cables are laid.

Sizes:
- Material: EPDM
- Length: 500 mm
- Width: 325 mm
- Height: 52 mm
- Weight: 6 kg