Marking

Fluorescent marking for noticing the pavement edge
glows for 12 hours
Ø50mm H8mm
the glowing feature lasts up to 20 years

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: orange

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed (min. order quantity 1000 pcs)
- stripe (min. order quantity 1000 pcs)
- black (min. order quantity 1000 pcs)

Marking tape for temporary traffic management
Aluminum carrier
Width 120mm
Rolls 100m
Complies with DIN EN 1436
Color options: yellow, white

Pavement reflector with glass balls to mark the edges of the pavement
Ø50mm H8mm
white
non-slip surface
the reflective feature lasts up to 20 years

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: orange

RVS 316 guiding line: 280x35x5 mm
Mounting:
a) Anchor(s) M6x20: drilling and bonding 2-component glue
b) Without anchor(s): bonding 2-component glue

Patterns:
Diamond
Brushed (min. order quantity 1000 pcs)
Stripe (min. order quantity 1000 pcs)
Black (min. order quantity 1000 pcs)

Temporary traffic management marking tape, suitable for use on longer periodic objects.
Type I, P5
Yellow
With reflective glass beads
Width 120mm
Rolls 100m
Durable at least 1 million roll overs
Complies with DIN EN 1436

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: blue

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black

Temporary traffic management marking tape, suitable for use on longer periodic objects.
Type II, P5
Yellow, with reflective glass beads
Width 120mm
Rolls 100m
Durable at least 1 million crossings
Complies with DIN EN 1436

Professional construction site marking for building construction and civil engineering, construction sites and road construction. Also can be used in tunnelling and mining.
Patented one-hand safety cap with easy-touch release for improved functionality and increased safety. Guaranteed marking without painted fingers.
Colour: white

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black

Professional fluorescent marking paint for the construction industry, land surveying and plan marking.
The special spray cap does not stain your hands and prevents accidental spraying.
The marking lasts about 6-9 months

Marking tape to cover existing markings
Width 120mm
Rolled 100m
Complies with DIN EN 1436 standard

Reflective road, street and ground sign. It is a signal to be stuck on the ground, yellow.
Made of the resistant ceramic coated material. Ideal for signalling or delimiting industrial areas, streets, private or public roads, etc.
It can be applied on the highway lane separator lines, as a tactile warning when changing lanes.
Fixing glue is not supplied.
Size: 100 x 100 x 22 mm.

The tactile rubber tile is made of vulcanized rubber.
Warning tiles at bus stops, metro stations and railway platforms, and roadside architectural elements for the blind and visually impaired. The advantage of the tactile rubber tile is that it can be installed on the existing surface. Flexible and with good durability. To install it on existing concrete or asphalt surfaces, using an adhesive polymer is recommended.
Hard-wearing surface, resistant to weather and ageing.

Dimensions: 600 x 300 x 65 mm

Ergonomic marking stick for Trig-a-cap marking spays
Allows you to apply markings easily and for a long period.
Arm in a metallic frame for a better hold.
Ergonomic handle enables the user to work without tiring.

Primer for laying road surface marking tape
Volume: 30L

Reflective road, street and ground sign. It is a signal to be stuck on the ground, white.
Made of the resistant ceramic coated material. Ideal for signalling or delimiting industrial areas, streets, private or public roads, etc.
It can be applied on the highway lane separator lines, as a tactile warning when changing lanes.
Fixing glue is not supplied.
Size: 100 x 100 x 22 mm.

Ergonomic marking stick for Trig-a-cap marking spays
Allows you to apply markings easily and for a long period.
Arm in a metallic frame for a better hold.
Ergonomic handle enables the user to work without tiring.

Rubber „Brajl” plate is made of vulcanized rubber color, a kind of road markings to facilitate the movement of person with disabilities. "Brajl" plate is an element of road safety for blind people which helps them to safely overcome the obstacles in their way. Advantage of our plate is that it can be installed without interfering with existing pavement. Is flexible of high strength characteristic. To apply it to existing concrete or asphalt surfaces is recommended to use an adhesive polymer.
Size: 600 x 300 x 65 mm

- made of glass
- diameter 50 mm
- height of the protruding part from the ground after installation: 11mm
- 100J
- load capacity 27T
- EN 1463-1 & 2

Suitable for installation on a concrete surface.
For example:
concrete ties, (double) paving stones, tiles, etc.

ATTENTION!
Do not use on asphalt!

Ergonomic marking stick for Trig-a-cap marking spays
Allows you to apply markings easily and for a long period.
Arm in a metallic frame for a better hold.
Ergonomic handle enables the user to work without tiring.

A tactile warning dome is the tactile marking system of the surface. Warning domes warn blind and visually impaired people about places that may endanger their safety in public spaces.

- dome dimensions: top Ø20, bottom Ø30, height 6 mm
- standard color range: white, but at the customer's special request, it is possible to produce in other colors
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer R-12/R-13 slip resistance

Boundary tape can be used to mark or delimit areas, be used to mark a course in sports competitions, to separate construction objects or a danger zone.
- dimensions of the danger tape: 80 mm x 500 m
- color: black-yellow

A tactile directional rail is the tactile marking system of the surface.

- rail dimensions: top 20mm, bottom 50mm, length 600mm, height 5mm
- standard color range: white, but at the customer's special request, it is possible to produce in other colors
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer R-12/R-13 slip resistance

Boundary tape can be used to mark or delimit areas, be used to mark a course in sports competitions, to separate construction objects or a danger zone.
- dimensions of the danger tape: 80 mm x 500 m
- color: red-white