Ø21,3 mm

Short Tee. Provides a perpendicular connection between two tubes. Top fitting for straight and level railing uprights. This fitting cannot be used to join a horizontal tube within the fitting.

Elbow 90°. Elbow joint fitting used as an end fitting for the top rail.

Wall Flange. This clamp is used on structures where positional fixing is required. Do not use as a base flange to support guard railings or similar systems.

Round base plate open. This tubefitting is suitable for constructions where the pipe has to run through. Suitable for the use of e.g. intermediate shelves.

Round base plate with inlay (SET). Excellently suitable as rod holder. Supplied as a set (left and right version). After you have placed the round foot plates, you can simply insert the tube. Also suitable for temporary removal of a passageway, where the tube can be removed easily and quickly.

Three Way Top Corner. Corner joint (90°) clamp used for top rail corners and any other rectangular system.

Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.

Two Socket Cross. 90° joint clamp between the middle rail and an upright on railings.

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Plastic cap used to plug the end of the tube.

Saddle Clamp. Our steel cap brackets are electrolytically galvanized and therefore rust-resistant. These so-called single-lip cover brackets are available for tube sizes 21.3 mm up to 60.3 mm. Extremely suitable for mounting blades on a tubular frame base.

Round pipe galvanized D=21.3mm
wall thickness 2.0 mm
maximum profile length 6 m