Road hazard warning lamps

LED (lm 1x58), 120 ° ≈ 20 cd, yellow, 1-sided
Light class L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (with 1 Ah battery), 500 (with 2 Ah battery)
With twilight sensor (100% white 30% in the dark)
Fastening: for fastening to a clamp, cone or pipe
Moisture-proof switch
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

LED (lm 1x58), 120 ° ≈ 20 cd, yellow, 2-sided
Light class L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (1 Ah with battery 7), 500 (2 Ah with battery 7)
With twilight sensor (100% white 30% in the dark)
Fastening: for fastening to a clamp, cone or pipe
Moisture-proof switch
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

LED (lm 1x58), 120 ° ≈ 20 cd, red, 1-sided
Light class: L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (with 1 Ah battery), 500 (with 2 Ah battery)
With twilight sensor (100% white, 30% dark)
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

LED (lm 1x58), 120 ° ≈ 20 cd, red, 1-sided
Light class: L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (with 1 Ah battery), 500 (with 2 Ah battery)
With twilight sensor (100% white, 30% dark)
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

Battery H4R25 6V 7Ah

Tester for 6V 4R25 batteries
The tester shows the battery charge level:
red: 10/30%
yellow: 30/70%
green: 70/100%

Easily configurable synchronous warning lights for temporary traffic management.
Included: 5 lamps, box and charger
Lamp dimensions: Ø210 mm
Light class: L8H
LED: 96xLED ≈ 2000 cd, yellow
Automatically synced
Rechargeable at once
Twilight switch: day 100% / night 30%
Power supply: 12V

The wave is made of universal lamps wired together. The universal lamp has a socket and a plug (on the cable to connect to another lamp.

Power: 12V
Dimensions of the pulsator: Φ 210 mm, height 90 mm, weight 0,6 kg/pc.
Shade diameter: Φ 200 mm
Colour of the lampshade: orange
Light source: LED PCB with increased light intensity with a special optical system that meets the parameters of lamp class L8L (light 250 cd) according to the standard EN 12352:2010
Average power consumption (one lamp): LED PCB L8L - 0,2 A (12V) or 0,1 A (24V)
Lamp synchronization: automatic
Backlight (in poor visibility): automatic
Twilight regulation of lighting intensity: LED - day 100% / night 30%
Voltage measurement system: below 8,5V the set switches off

Set of two ϕ 200 pulsators – simultaneous flash
One lamp is a control lamp, the other is controlled, the lamps are connected by a cable

- LED lamp Ø200mm
- yellow LEDs
- housing Ø210mm
- 12 / 24V
- L8H
- Flashing mode 120xmin
- dim sensor (100% during the day, 50% in the dark)
- set includes 2 lamps + mounting accessories for Ø60mm tube

Site safety lamp - side mount.
The site lamp is tough, long-lasting and easy to install in a range of working environments. Suitable for all scaffolding, skip lugs, HERAS fencing and roadside barriers, as well as bolting onto flat surfaces.

- size: 120mm x 118mm x 95mm
- battery: 2 x AA ( not included)
- 1,500 hours performance
- dimmer switch
- 2 reziimi: flashing(1500h) and steady (750h)
- candela: 0.8 (flashing) / 0.95 (steady )
- protection class IP54
- BS EN 12352: 2006, L1
- LED yellow