Column protectors

Column Sentry FIT is a revolutionary column guard that adjusts around different sizes. The product features four locking sides that slide into place to create a flexible, shock-absorbing pillar guard. No more guessing or finding the closest size. Corner to corner, uniform protection on all sides; the safety zone remains the same.

The Sentry FIT contains a patented air chamber that directs impact energy away from the pillar. Made from a proprietary polyethylene/vinyl blend.

The product is available in two sizes: S and M.
Pieces slide in and out to fit everyone, size within every size.


The large FIT adjusts to fit columns ranging in size from 100x100mm to 200x200mm.
M large FIT adjusts to fit columns ranging from 200x200mm to 300x300mm.
The four sides of the FIT are aligned to ensure even corner-to-corner protection. This means that regardless of the size of the column, the depth of the safety zone remains the same. Whether the FIT parts are expanded or contracted, both provide the same amount of air-cushioned protection.

The four-sided design eliminates any stiff spots on the pillar guard.

The protection consists of 2 elements that are placed around the post and connected to each other using straps. Very easy to install, does not require fixing to the floor or post.
Air chambers inside the modules help absorb impact energy.

- Dimensions of the opening in the middle of the pillar guard: 110*106mm
- Outer size: 360*400mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 10kg
- The product can be used at temperatures: -15c to +40c

The protection consists of 2 elements that are placed around the post and connected to each other using straps. Very easy to install, does not require fixing to the floor or post.
Air chambers inside the modules help absorb impact energy.

- Dimensions of the opening in the middle of the pillar guard: 153*153mm
- Outer size: 360*400mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 10kg
- The product can be used at temperatures: -15c to +40c

Suitable for columns with dimensions between 160mm x 160mm and 260mm x 260mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.
Equipped with red and white reflective stickers.

The pole protector is suitable for poles in sizes 160mm x 160mm to 210mm x 210mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.

- Dimensions of the opening in the middle of the pillar guard: 210*210mm/160*160mm
- Outer size: 600*600mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 23kg
- The product can be used at temperatures: -15c to +40c

The pole protector is suitable for poles from 260mm x 260mm to 320mm x 320mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.

- Dimensions of the opening in the middle of the pillar guard: 260*260mm/320*320mm
- Outer size: 600*600mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 23kg
- The product can be used at temperatures: -15c to +40c

Suitable for columns with dimensions of 450mm X 450mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Universal beam protection is suitable for beams with sides from 200mm to 700mm.
The protection consists of 4 elements that can be easily cut to the desired size.
Air chambers inside the modules help absorb impact energy.

- Made of LLDPE material (linear chain low density polyethylene).
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 16kg
- The product can be used at temperatures: -15° to +40°C

The guard is tightly wrapped around the support beam.
Suitable for posts with dimensions 500x500mm

- material: REFLEX (technopolymer)
- color: yellow RAL 1018, black RAL 9005
- impact resistance: 2000 J
- dimensions: Ø150 (P) 500x500 mm (H) 1100 mm
- environment: −10 ºC to 60 ºC
- Easy to install and requires no attachment to the post or floor

To protect the support beams and posts.

Material: REFLEX (technopolymer)
Color: yellow RAL 1018, black RAL 9005
Impact resistance: 2400 J
Dimensions: ø90 L700x700 h140 mm

During installation, it should be ensured that there is a gap of 75 mm between the column protection and the column (exact drawing in the installation manual file)!

The product can be ordered in different sizes. Ask for more!

Suitable for columns with dimensions of 150mm x 150mm. Protection contains 1 element, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Suitable for columns with dimensions of 200mm x 200mm. Protection contains 1 element, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Suitable for columns with dimensions between 250mm X 250mm and 300mm X 300mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Set contains 2 pieces

Spacers-extensions for CP200 column protection
Dimensions: 1m x 210mm
Set contains of 2 pieces.

Spacers-extensions for CP300 column protection
Dimensions: 1m x 310mm
Set contains of 2 pieces.

Park Sentry® parking collision protectors provide a new, attractive way to add a layer of effective protection around parking structure columns. These parking collision protectors add a soft, scratch-resistant layer of protection around concrete columns and walls, protecting both columns and vehicles from collision damage. Park Sentry® Square is designed to fit around any sized 4-sided column, square or rectangular. Park Sentry Square is a modular column padding product, made of a combination of corner pieces and flat panels that fit together for a seamless installation. The components fit together with (included) interlocking keys and can be cut to fit smaller columns, or extra panels can be added to fit larger columns.

This perfectly fits a 610x610mm quare column. Integrated cutting grooves are spaced every 40mm for easy sizing. Park Sentry Square panels are thin, only 40mm thick, adding little to the column’s footprint. The corner pieces add thickness where it is needed to absorb heavier blows – the corners are 55mm. The park column padding product is designed to double a typical auto bumper’s ability to protect from collisions.

The park column padding product is secured to the column using adjustable reflective straps.

The standard KIT includes everything you need: 4 corners, 4 panels, 8 interlocking keys, and a set of straps.