Traffic island

Consul MINI is an element of road safety made of rubber granules in a gray or brick-red color with a white rant covered with reflective microspheres. It makes very good visibility even at night. Consul MINI is characterized by:
-quick and easy installation
-resistance to mechanical damage

Application:
-in car parks at the entrance and exit
-as an island to separate traffic lines
-very good solution on the narrow roads where there is no possibility to install large islands

Consul 50 is an element of road safety made of rubber granules in a brick-red color. The edge of Consul can be covered with white reflective microspheres or with white 3M reflective tape. It makes very good visibility even at night. Consul 50 is an element characterized by:

- resistance to mechanical damage
- quick and easy installation

Application:
- in car parks
- for pedestrian crossings
- as an island to separate traffic lanes

– consists of 8 modules
– Dimensions:: Ø 3000 mm x 100/10 mm
– MaterIal: vulcanised rubber
– 3M Class 2 light-reflecting white arrows and 8 cover-reflectors Ø50mm
– Use glue for stronger fastening (not included in the set)
– For use at temperatures from -40 ° C to + 60 ° C
– Weight: 400 kg

Easy installation that takes less than 2 hours.

Separator with flexible reflector marking
separator size: 1170x150x50 mm
flexible reflector marking: H600mm
weight: 4,7 kg

Rubber road separator is an element of road safety, used for
quick and easy horizontal marking of changes and redirections in the road lane. The element is made of rubber (recycling), and the lateral surfaces are glued with reflective tape
also in yellow.

- Dimensions: 1130x240xH80mm
- material: rubber
- number of mounting holes 4

The chain traffic separator is an element of road safety used for temporary or permanent separation of part
of road lane during roadworks. It can be used to change the organization of the movement. Also on the
parking lots to the fencing individual areas by traffic. Checks also to wrap the flowerbeds, islands. It is easy
and fast to install and allows you to organize very unusual surface shapes even from different angles.
It is made of rubber granulate.
Use it in yellow, black, red and white color.

Dimensions: 590x160x160mm

Reflective “mushroom” element for 034055570061

Ideal for the protection of tires in the event of a collision. It can be used to wrap traffic islands or roundabouts. It also works well in tunnels and underground car parks.
Mounting holes: 3
Dimensions: (W)90x(L)1000x(H)100mm
Weight: 7 kg

Traffic sign 686, 150x600mm, RA2
Attachable to the lane separation module

The U-turn separator O3 is intended as a traffic safety element, for example at the junction of the main road and the ramp, giving the driver additional information about the intersection. Separating elements are marked with light-reflecting arrows, which ensures better visibility even in the dark.

- material: plastic
- fillable with water or sand
- RA2 class reflective arrows
- The O3 safety element can be attached to the asphalt or concrete surface with anchors

Dimensions:
O3.500 - R = 500
O3.750 – R = 750
O3.1000 – R = 1000

Flex island delineator
- size: H1000mm, width 320 mm
- reflective RA2 foil
- material: TPU

Flex Delineator Bollard.

- 120mm, H=750 mm
- flexible, durable, UV-resistant
- red and white RA1 reflective sticker (left or right direction)
- weight: 1,4kg
- mounting accessories: 4x Ø18x90xØ10 mm (not included)

Lane seperator 1170x150x50 mm.

- reflective tape-design provides effective visibility
- durable and unbreakable material
- operating temperature range: -20°C / +60°C
- wide ranfe of use: on all roads, streets, parking lots, working and construction zones and etc. to control traffic and divide lanes.
- weight: 2,4kg

Lane seperator with mini flexible post.

- 1170x150x280 mm.
- bi-directional high quality strips and reflective lenses on base
- durable and unbreakable
- easily exchangable flexible post
- operating temperature range: -20°C / +60°C
- base dimensions: 1170x150x280 mm
- colour: orange
- weight: 2,6kg

Lane seperator with small indicator 1170x150x280 mm.

- flap-design provides effective visibility and channelizing
- bi-directional high quality strips and reflective lenses on base
- durable and unbreakable flap base
- easily exchangable flap with its spare part
- operating temperature range: -20°C / +60°C
- colour: orange
- weight: 2,6kg

Lane seperator with small indicator 260x160x600 mm.

- flap-design provides effective visibility and channelizing
- bi-directional high quality strips and reflective lenses on base
- durable and unbreakable flap base
- easily exchangable flap with its spare part
- operating temperature range: -20°C / +60°C
- colour: orange
- weight: 0.84kg

Lane seperator with mini flexible post.

- 260x160x280 mm.
- bi-directional high quality strips and reflective lenses on base
- durable and unbreakable
- easily exchangable flexible post
- operating temperature range: -20°C / +60°C
- base dimensions: 260x160x280 mm
- colour: orange
- weight: 0.7kg

Lane seperator with small indicator 260x160x280 mm.

- flap-design provides effective visibility and channelizing
- bi-directional high quality strips and reflective lenses on base
- durable and unbreakable flap base
- easily exchangable flap with its spare part
- operating temperature range: -20°C / +60°C
- colour: orange
- weight: 0.7kg

Mini seperator, blank H915mmx150mm

- operating temperature range: -20°C / +60°C
- colour: white
- weight: 5,2kg

Separator is an element of road safety used for marking bicycle lanes, separating tramway rail tracks from vehicle lanes, designation of parking spaces, separation of bus bays, etc.
Dimensions: 1200 x 150 x 45mm
Color: black-white, rubber
Fixing holes 3

To be installed where driving lanes diverge, such as to mark separation islands and curves.
- dimensions H900xØ400mm
- RA2 class reflective strips
- made of polyethylene

- dimensions H900xØ200mm
- RA2 class reflective strips

- Dimensions: 1130x240xH80mm
- material: rubber
- number of mounting holes 4