Speed bumps

PVC traffic threshold (lying policeman) L = 2500 mm
Maximum recommended crossing speed 20 km / h
Element and dimensions:
end element 250x400x50mm
center element 500x400x50 mm

Mounting accessories (not included):
13159FP

Rubber speed bump is wear-resistant and durable
Maximum recommended crossing speed 20 km / h
Installation: on asphalt or concrete, not suitable for gravel roads

Element dimensions:
End 215x430x50mm
middle 500x430x50 mm

Installation accessories not included:
Product code: 13159FP

Wide speed bump
Material: rubber, wear-resistant and durable
Maximum recommended crossing speed 20 km / h
Installation: on asphalt or concrete; not suitable for gravel roads

Element dimensions:
end 435x895x50mm
middle 495x895x50 mm

Installation accessories not included:
Product code: 13159FP

This model of speed bump “LONG” is the perfect solution for traffic calming in:
-internal roads
-parking areas
-work zones
- can be used as a wall protector too

-where a required speed limit of 10 - 25 km/h e.g. : in school zones, shopping malls, hotels, petrol stations, garages, etc.

- dimensions: 1830x300xH55mm

- dimensions: 1830x300xH55mm
- threshold modules can be connected together
- 2 cable grooves: 30x30mm
- material: rubber
- the maximum recommended speed is 30 km/h

The flat traffic threshold, or Berlin threshold, is ideal for places where low speeds are required, it also allows large vehicles to travel smoothly. The threshold attracts attention and increases safety and speed reduction (up to 30 km/h).

– consists of four modules
– Dimensions: 2000x1800x65 mm
– Material: vulcanised rubber (hard-wearing, UV-protected)
– Color: red
– Reflective arrows (3M class 2) and 4 cover-reflectors
– Maximum overtaking speed: 30 km/h
– Use glue for stronger fastening (not included in the set)
– Suitable in temperatures between -40°C and +60°C
– Easily installable
– Good value for money
– Weight: 240 kg

Cable threshold with 2-channel can withstand the load of a laden truck.

Material: EPDM rubber
Dimension: 500х300х55,6mm
Colour: black
Hole diameter - 29 mm
Weight: 5,5 kg

The foldable traffic threshold is intended for usage on private roads and in parking lots. Simple installation, no fasteners are required. Comes with a carrying case for better storage and transport of the sill.

– Dimensions: 3000x250x25 mm (if folded 375x250x310 mm)
– Material: polyurethane (hard-wearing, UV-protected, grease, alkane and acid resistant)
– Color: Yellow/black
– Reflective arrows (Class 2)
– Maximum crossing speed: 25 km/h
– Maximum load capacity: 20 tons
– Modules are attached to each other
– Set contains a carrying bag
– For use at temperatures from -40 ° C to + 60 ° C
– Weight: 12 kg

The portable speed bump is durable and designed as a temporary rumble strip to be placed on the road to reduce traffic speed in emergencies, in school zones or public events.
– Size: 3000x220x15 mm
– Material: TPU Polyurethane
– Color: yellow
– Max load: 10T
– Carry bag included
Weight: 13 kg

dimensions: 400x500xH50mm
material: hard rubber compound
color: yellow
number of mounting holes: 4

dimensions: 400x500xH50mm
hard rubber
black

dimensions: 400x250xH50mm
yellow
hard rubber

dimensions: 400x250xH50mm
black
hard rubber
3 mounting holes

500x400xH50 mm
yellow
PVC material
4 mounting holes

500x400xH50 mm
black
PVC material
4 mounting holes

400x250x50mm
yellow
PVC material
2 mounting holes

400x250x50mm
black
PVC material
2 mounting holes

The rubber speed bump is a product designed for a wide range of road users who wish to increase the level of safety. Made of rubber in black and yellow. Equipped with a “cat’s eye” for increased visibility at night. The material used provides for long-term usage and preservation of colour.
Size: 500x900xH50 mm
Fixing holes: 6

The rubber speed bump is a product designed for a wide range of road users who wish to increase the level of safety. Made of rubber in black and yellow. Equipped with a “cat’s eye” for increased visibility at night. The material used provides for long-term usage and preservation of colour.
Size 430x900xH50 mm
Fixing holes 4

- dimensions: 250x300xH55mm
- material: rubber

- dimensions: 1830x300xH55mm
- material: rubber

Ramp dimensions: L1200 x W300 x H6/15 mm

- dimensions: 500x1000xH0-100mm
- number of mounting holes 4
- material: rubber
- color: black

- unbreakable metal spikes and durable plastic cover
- blocker facility to leave spikes closed when stacking and allowing private passing directly away
- blocker facility also provides stringent obstruction for reverse direction passing
- better visibility with unilateral reflective tapes
- with sloped shape; no dislocation on ground and no damage on wheel trim
- with modular design; expandable to any road width attaching to each other
- operating temperature range: -20°C/+60°C
- wide range of use: on roads, streets, parking lots and all points required to control one way
- weight 7,3 kg

In the set:
- 1x fixing anchor 10x100mm
- 1x dowel
- 1x washer

Suitable for attaching traffic thresholds and parking barriers to asphalt

A post marking a traffic threshold. Threshold markings may be missing on roads with a speed limit of 30 km/h or less.

High quality seal / sill under the garage door.
The seal is designed to prevent water, dirt and grime from entering the garage when the garage door is open.
The threshold can also be used to divert weather water on slopes, driveways, etc.
The product is made of strong, durable and completely weather-resistant synthetic rubber - EPDM, does not lose elasticity or age.
Suffers from driving over vehicles and does not damage tires.
The elasticity of the material ensures a more comfortable crossing.

- material: EPDM rubber
- dimensions: 1000 х 78 х 14mm
- color: black

Sales unit: linm

Ideal for use as a driveway to high curbs. It can be mounted to the pavement using mounting hardware both can be used as a temporary element.
The rump has a cable duct that does not interfere with the assembly of the rump in places where various types of cables are laid.

Sizes:
- Material: EPDM
- Length: 500mm
- Width: 325mm
- Height: 52 mm
- Weight: 6 kg

Ideal for use as a driveway to high curbs. It can be mounted to the pavement using mounting hardware both can be used as a temporary element.
The rump has a cable duct that does not interfere with the assembly of the rump in places where various types of cables are laid.

Sizes:
- Material: EPDM
- Length: 600mm
- Width: 300mm
- Height: 100 mm
- Weight: 8.5 kg

Rubber rump – made of EPDM rubber reinforced with a cord. Ideal for use as a driveway to high curbs. It can be mounted to the pavement using mounting hardware both can be used as a
temporary element. The rump has a cable duct that does not interfere with the assembly of the rump in places where various types of cables are laid.

Sizes:
- Material: EPDM
- Length: 600mm
- Width: 360 mm
- Height: 150 mm
- Weight: 16,5 kg