Accessories for signs

One-sided traffic sign clip for attaching to a 60mm pipe.
One traffic sign requires 2 clips.

Double-sided traffic sign clip for 60mm pipe

Traffic sign end clamp, 3mm opening, for 60mm post, short

Traffic sign end clamp, 3mm opening, for 60mm post, long

Road sign hook clamp with quick attachment, for post 60mm
aluminium

Cylinder end cap for post Ø60mm
- Ø60/160 mm
- material: aluminum
- color: white

ATTENTION: The price is for one end cap. The figure shows a set of two clamps. The cylinder is also not included.

Foundation locking ring (for LMA-1, LMA-2 or road barrier). For mounting on a 60mm pole.

Traffic sign post made of hot-dip galvanized steel pipe. Diameter 60mm, length 3500mm.

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

Traffic sign post tip for 60mm post

Soil anchor for a traffic sign post, suitable for a 60mm post

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

These sleeves will also be of use in places such as:

traffic islands
pedestrian refuges
bridges
lane dividers
in places with changed traffic organization, e.g. cemeteries during All Saints’ Day

The sleeve allows for mounting traffic signs on 1.5” and 2” posts. Place the nut and the clamping insert on the post. Then place the post in the sleeve base and tighten the nut.

The traffic sign base LMA-1 is suitable for a traffic sign post with a diameter of 60 mm, foundation height 420 mm, sole diameter 180 mm, weight 24 kg

- Dimensions: 850x850x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 255 kg

- Dimensions: 500x500x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 80 kg

The concrete barrier is great for both temporary and permanent road blocking and, due to its more compact size, can be placed in smaller spaces. Because of the shape, the barrier allows for easy lifting and movement e.g. by fork lift truck. It has reflectors on four sides and comes with a hole for a pole.

Height: 500 mm
Width: 500 mm
Depth: 400 mm
Weight: 130 kg

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 50mm x 33 m
– orange-black print
– non-reflective

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 75mm x 33 m
– orange-black print
– non-reflective

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 100mm x 33 m
– orange-black print
– non-reflective

Stainless steel band
w: 19 mm (3/4") l: 30 m

Stainless steel ribbon buckle

3/4"–19mm, 100 pcs in a box.

Ball-lock cable ties made of AISI 304 stainless steel, 201 provide excellent resistance to high temperatures, corrosion and extraordinary resistance to UV radiation. These cable ties are very easy to install.
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required

Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm

Tool for tensioning and cutting stainless steel cable ties. Resistant to corrosion and oxidation. Ideally suited for Ball-lock ties made from various grades of stainless steel. The handle can be used to adjust the level of tension on the tie as needed, the built-in mechanism cuts off the excess section of the tie.
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm

Adapter is perfectly suited for a quick installation of traffic signs.

Sole for Ø60mm metal post
dimensions: 200 x 200 x 8 mm, pipe Ø70 mm L – 300 mm

The Loob screw banding tool is used to tension stainless steel bands with widths of up to 20 mm in all steel grades offered by Loob. It is made of corrosion-resistant galvanized steel.
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,7mm

One-sided traffic sign clamp for a 114mm pipe

One-sided traffic sign clamp for a 168mm pipe

One-sided traffic sign clip for a 220mm pipe

Double-sided traffic sign clip for a 76mm tube