Planters

The broad profiles give the planters a sleek, chic look. Available in square, rectangle, hexagon or octagon.
A range of shapes and sizes that make these planters suitable for any use in the public area. The Aesculus planter is made from household plastic waste and combines well with the ECO-oh! benches.
To increase visibility, these planters can be equipped with various types of reflectors. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The broad profiles give the planters a sleek, chic look. Available in square, rectangle, hexagon or octagon.
A range of shapes and sizes that make these planters suitable for any use in the public area. The Aesculus planter is made from household plastic waste and combines well with the ECO-oh! benches.
To increase visibility, these planters can be equipped with various types of reflectors. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The broad profiles give the planters a sleek, chic look. Available in square, rectangle, hexagon or octagon.
A range of shapes and sizes that make these planters suitable for any use in the public area. The Aesculus planter is made from household plastic waste and combines well with the ECO-oh! benches.
To increase visibility, these planters can be equipped with various types of reflectors. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The planters from the ‘Pyrus’ series are manufactured from hollow profiles of 4 cm x 22 cm, and corner posts 10 cm x 10 cm in which the profiles are pushed. Thanks to
the grooves on two or three sides of the corner posts, it is possible to design a varied selection of planters. This series provides many opportunities for customisation. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed
- increased visibility is possible by equipping the planters with various types of reflectors.
- use: gardens, parks, playgrounds, public domains, recreation parks, car parks, schools, etc

Note: measurements can deviate by up to 3%

The planters from the ‘Pyrus’ series are manufactured from hollow profiles of 4 cm x 22 cm, and corner posts 10 cm x 10 cm in which the profiles are pushed. Thanks to
the grooves on two or three sides of the corner posts, it is possible to design a varied selection of planters. This series provides many opportunities for customisation. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed
- increased visibility is possible by equipping the planters with various types of reflectors.
- use: gardens, parks, playgrounds, public domains, recreation parks, car parks, schools, etc

Note: measurements can deviate by up to 3%

The planters from the ‘Pyrus’ series are manufactured from hollow profiles of 4 cm x 22 cm, and corner posts 10 cm x 10 cm in which the profiles are pushed. Thanks to
the grooves on two or three sides of the corner posts, it is possible to design a varied selection of planters. This series provides many opportunities for customisation. Functional underside beams ensure easy transport.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed
- increased visibility is possible by equipping the planters with various types of reflectors.
- use: gardens, parks, playgrounds, public domains, recreation parks, car parks, schools, etc

Note: measurements can deviate by up to 3%

The planters from the ‘Quercus’ series are manufactured from planks with a solid profile of 15 cm x 6 cm with two cut-outs (7 cm x 7 cm), and two holes. The elements are
fixed together using 4 galvanised M16 threaded rods. The holes are finished with four
plastic caps. The planter is equipped with support beams so that it can be picked up
with a forklift truck.

- material: polyolefin – manufactured using recycled household plastic waste
- available colours: grey
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The planters from the ‘Quercus’ series are manufactured from planks with a solid profile of 15 cm x 6 cm with two cut-outs (7 cm x 7 cm), and two holes. The elements are
fixed together using 4 galvanised M16 threaded rods. The holes are finished with four
plastic caps. The planter is equipped with support beams so that it can be picked up
with a forklift truck.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The planters from the ‘Quercus’ series are manufactured from planks with a solid profile of 15 cm x 6 cm with two cut-outs (7 cm x 7 cm), and two holes. The elements are
fixed together using 4 galvanised M16 threaded rods. The holes are finished with four
plastic caps. The planter is equipped with support beams so that it can be picked up
with a forklift truck.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%

The planters from the ‘Quercus’ series are manufactured from planks with a solid profile of 15 cm x 6 cm with two cut-outs (7 cm x 7 cm), and two holes. The elements are
fixed together using 4 galvanised M16 threaded rods. The holes are finished with four
plastic caps. The planter is equipped with support beams so that it can be picked up
with a forklift truck.

- material: polyolefin – manufactured using recycled household plastic waste
- user-friendly: little or no maintenance needed
- long service life (minimum of 10 years)
- resistant to water and humidity (anti-rot)
- frost-resistant
- resistant to acids and salts
- can be handled like wood; no special tools needed

Note: measurements can deviate by up to 3%