40x40mm

Short T-piece - 40 mm. Forms a perpendicular connection between two tubes. Upper fitting for straight, horizontal railing supports. This fitting can not be used for horizontal tube connections in the fitting itself.

Long T-piece. This fitting can be used where a join is required in the horizontal tube.

Slope Elbow 90° Variable angle 0° - 11°. Elbow joint fitting used as an end fitting for the top rail up to 11°.

Suitable for end connection.

Rectangular Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Three-way elbow 90° - 40 mm. Angle connection clamp (90°) for corners of overheads and all other angled connections.

Angle of continuous upright - 40 mm. Corner connection (90°), where the vertical tube runs through the clamp.

Two Socket Cross - 40 mm. 90°- joint clamp between the middle rail and an upright on railings.

Side Outlet Tee - 40 mm. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. The upright tube passes through the clamp.

Type 34, Handrail support - 40 mm. To attach railings and constructions to walls.

Type 55, Eyelet part single lip - 40 mm. Tubefitting for fixing panels.

Collar plate double sided lip - 40 mm. Tubefitting for fixing panels.
Suitable for square tube 40 x 40 mm

Collar Plate Double Side 90°. Panel fixing with two lugs also used for locking gates.

Steel galvanized square 40 mm tube profile / socket of 2 mm thickness. This profile has a standard trade length of 6
meters, but can always be cut to size for you. Suitable for our square tubefittings.
Black

Maximum length for shipping by courier is 2 meters!

Steel galvanized square 40 mm tube profile / socket of 2 mm thickness. This profile has a standard trade length of 6
meters, but can always be cut to size for you. Suitable for our square tubefittings.

Maximum length for shipping by courier is 2 meters!