Surface Mount Light 18xLED , 12-24V, amber

20 x 0,25W LED
3 flashing patterns
24V
2 pieces in set

132x49x19mm
11-30V
12x LED, amber
Clear lens
25 different flashing alternatives, several flashers can be synchronized together
IP67
SAE / Title XIII / ECE R65 Class2 (XA2) / e13

. LED Power: 24pcs*2W OSRAM, amber
. Voltage: 12-24Volt DC
. Waterproof: IP67
. Certificate: ECE R65 Single Flash, ECE R10
. SAE J595 CLASS1 Double Flash
. Material: PC lens, aluminum base with 3M sticker
. Flashing: 19 patterns, single, double, alternate flash...
. Function: With memory, Flashing at the same time, Flashing alone
. Five wires: Red-Positive, Black-Negative, Yellow-Switch, White-Input, Gray-Output

voltage is 12V/24V
6x LEDs 120 W
3 warning flashes
wire: 200 mm
dimensions: 131x31x6mm
according to standards such as ECE R10, ECE R65

voltage is 12V/24V
4x LEDs 12 W
4 warning flashes
wire: 150 mm
dimensions: 101x31x17mm
according to standards such as ECE R10, ECE R65

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V