Tactile warning dome

The tactile rubber tile is made of vulcanized rubber.
Warning tiles at bus stops, metro stations and railway platforms, and roadside architectural elements for the blind and visually impaired. The advantage of the tactile rubber tile is that it can be installed on the existing surface. Flexible and with good durability. To install it on existing concrete or asphalt surfaces, using an adhesive polymer is recommended.
Hard-wearing surface, resistant to weather and ageing.

Dimensions: 600 x 300 x 65 mm

RVS 316 guiding line: 280x35x5 mm
Mounting:
a) Anchor(s) M6x20: drilling and bonding 2-component glue
b) Without anchor(s): bonding 2-component glue

Patterns:
Diamond
Brushed (min. order quantity 1000 pcs)
Stripe (min. order quantity 1000 pcs)
Black (min. order quantity 1000 pcs)

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed (min. order quantity 1000 pcs)
- stripe (min. order quantity 1000 pcs)
- black (min. order quantity 1000 pcs)

A tactile warning plate is the tactile marking system of the surface. Warning tiles warn blind and visually impaired people about places that may endanger their safety in public spaces.

- tile dimensions: 400x400mm, height 7,8 mm
- tile base thickness: 2 mm
- standard color range: white, yellow (RAL1023), light gray (RAL7042), anthracite gray (RAL7016), black (RAL9005)
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer (R-12/R-13 slip resistance

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black