Type 10, Wall Flange Ø42,4

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters - horizontal Ø48.3 mm and vertical Ø42.4 mm.

Combi Socket Tee and Cross. Frequently used for racking. The upright hole can be changed according to the application. For shelved racking, the outside hole is upright, and for pallet racking the upright is inside the carrying rails.

Corner Swivel 90°. Swivel fitting for variable angle fixing for a corner post.

Internal Coupling. A streamlined flush joint in two tubes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.

Elbow 90°. Elbow joint fitting used as an end fitting for the top rail with different tube dimensions Ø42,4 mm and 48,3mm

748 - DDA Assist Saddle Internal Swivel Bracket
To attach handrail to an upright at any angle.

Although the saddles type Assist fittings are primarily designed to fit snugly on Ø42.4 diameter tubes, they may also accommodate Ø48,3 mm tubes with a slight central gap when fitted.