Type 32, Clamp-On Tee Ø26,9

Round pipe galvanized D=26.9mm wall thickness 2.6 mm
maximum profile length 6 m
maximum length for shipping is 2 meters!

Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Perfect for attaching clothes rails and temporarily limiting the passageway (the tube can be easily inserted and removed between the clamps) 2 pcs in a set (left and right version). The clamps are made of hot-dip galvanized malleable iron, durable, corrosion-resistant and long-lasting. Comply with TÜV requirements.

Long Tee. Similar to Type 2. This fitting can be used where a join is required in the horizontal tube.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.

Galv. Ridge Fittings 27½°. This tube fitting is used for roof construction and is usually in combination with type 85.