BORG 2300 COMBINATION
SKU: BOPNC.2300.Ct
Unit: pc
Delivery time: 8-10 nädalat
Unit: pc
Delivery time: 8-10 nädalat
BORG is a series of durable seating furniture.
Dimensions: 2300*2270*900mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Dimensions: 2300*2270*900mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Points of attention • All products must be unpacked immediately after delivery. • Every kind of (hard) wood will turn grey under the influence of UV radiation, weather and wind. The final colour depends on the starting colour. • Wood is a natural product that “works” and will shrink or expand depending on temperature and moisture content. • Hardwood can turn black when in contact with Corten steel, which will eventually turn gray. • Corten Steel should never be constantly in moisture, it should drain well and ventilate in all situations. • Corten Steel products are not (fully) rusted on delivery, we only use Corten steel type S355JOWP. • Coastal areas: We do not recommend using Corten steel within a radius of 2 km from a coastline. • During the weathering process rust residue can come off the product, which can result in stains. • Drilling / grinding in the material is not permitted.
Similar products
DIMENSIONS
height: 82 cm
width: 63 cm
length: 182 cm
weight: abt 44 kg
MATERIALS
seat, backrest: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 82 cm
width: 63 cm
length: 182 cm
weight: abt 44 kg
MATERIALS
seat, backrest: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001252
DIMENSIONS
height: 45 cm
width: 45 cm
length: 180 cm
weight: abt 56 kg
MATERIALS
seat, backrest: varnished softwood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: dark gray, black
height: 45 cm
width: 45 cm
length: 180 cm
weight: abt 56 kg
MATERIALS
seat, backrest: varnished softwood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: dark gray, black
SKU: 001228
DIMENSIONS
height: 78 cm
width: 62 cm
length: 61 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 78 cm
width: 62 cm
length: 61 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001291
Round with pink integrated LED lighting. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating options in the space.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Ideal for 4-6 people.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Outer diameter Ø1800mm.
Inner diameter Ø1000mm.
Height 400mm.
Volume: 540L.
4-6 seats inside / 6-8 seats outside.
Light function
The integrated LED light tube is installed in the middle of the product and shines through the translucent polyethylene surface with a single brightness. Optimum light output is achieved with a light unit of 20 lux.
Light unit
Integrated LED light tube (Duralight, Semko approval), halogen white, 4m./10W for orange/yellow bench and 8m./20W for red.
Direct 230V connection box through the access hatch at the bottom. The possibility of decontamination in the box.
Density and life:
IP44 / LED light tube, approx. 20,000 hours ~ min. 6 years of light in the dark hours.
Fixation:
Fill with water (250 liters) / sand (250 kg) through integrated caps or
set in the soil. Clamps must be ordered separately.
Color choice:
Red, orange, yellow.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Ideal for 4-6 people.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Outer diameter Ø1800mm.
Inner diameter Ø1000mm.
Height 400mm.
Volume: 540L.
4-6 seats inside / 6-8 seats outside.
Light function
The integrated LED light tube is installed in the middle of the product and shines through the translucent polyethylene surface with a single brightness. Optimum light output is achieved with a light unit of 20 lux.
Light unit
Integrated LED light tube (Duralight, Semko approval), halogen white, 4m./10W for orange/yellow bench and 8m./20W for red.
Direct 230V connection box through the access hatch at the bottom. The possibility of decontamination in the box.
Density and life:
IP44 / LED light tube, approx. 20,000 hours ~ min. 6 years of light in the dark hours.
Fixation:
Fill with water (250 liters) / sand (250 kg) through integrated caps or
set in the soil. Clamps must be ordered separately.
Color choice:
Red, orange, yellow.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 136.01
, Delivery time: 6-8 nädalat
Arched bench. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: R1350mm, H400mm, Width (cross section): 400mm.
Volume: 300 liters.
3 x modules (circle): outer diameter: Ø2700 / inner diameter Ø1900mm.
8-10 seats inside / 12-14 seats outside. A playground for 4-5 children is created inside the circular bench.
Combinations:
Combine "O" (circle, 3 modules) or "C" (2 modules) or "S" (2 or more modules) from the Loop Arc details.
Loop Arc details can also be combined with Loop benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4).
Fill the parts 3/4 with water (225 liters) / sand (225 kg) or fix them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: Stainless steel, glass blown
Also works as a mounting bracket. Therefore, B4 mounting brackets can be omitted when armrests are used.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: R1350mm, H400mm, Width (cross section): 400mm.
Volume: 300 liters.
3 x modules (circle): outer diameter: Ø2700 / inner diameter Ø1900mm.
8-10 seats inside / 12-14 seats outside. A playground for 4-5 children is created inside the circular bench.
Combinations:
Combine "O" (circle, 3 modules) or "C" (2 modules) or "S" (2 or more modules) from the Loop Arc details.
Loop Arc details can also be combined with Loop benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4).
Fill the parts 3/4 with water (225 liters) / sand (225 kg) or fix them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: Stainless steel, glass blown
Also works as a mounting bracket. Therefore, B4 mounting brackets can be omitted when armrests are used.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 137.110
, Delivery time: 6-8 nädalat
BORG is a series of durable seating furniture.
By combining a one-sided bench with a table from the BORG series, you get a nice picnic furniture.
Dimensions: 1850x750x1000mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
By combining a one-sided bench with a table from the BORG series, you get a nice picnic furniture.
Dimensions: 1850x750x1000mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
SKU: BOLC.750.Ct
