BORG 2300 round bench
SKU: DUBE.R2300S.Ct
Unit: pc
Delivery time: 8-10 nädalat
Unit: pc
Delivery time: 8-10 nädalat
The characteristic modernity and curved design of the DUNC series.
The products are easily fixed to the ground using pre-drilled fixing holes.
A picnic set and trash cans are also available in the same series to create complete urban solutions.
Dimensions: 2300*2300*450mm
Description:
The bench has:
• Mounting holes for surface mounting
• Warranty 5 years
Standard material:
Frame material
• Corten steel 10 mm
• Galvanized steel 10 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Pea sizes: 120x20 mm
Maintenance:
• Regular cleaning and oiling of the wood so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning, removing dirt with clean water.
NB! Do not use a pressure washer.
The products are easily fixed to the ground using pre-drilled fixing holes.
A picnic set and trash cans are also available in the same series to create complete urban solutions.
Dimensions: 2300*2300*450mm
Description:
The bench has:
• Mounting holes for surface mounting
• Warranty 5 years
Standard material:
Frame material
• Corten steel 10 mm
• Galvanized steel 10 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Pea sizes: 120x20 mm
Maintenance:
• Regular cleaning and oiling of the wood so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning, removing dirt with clean water.
NB! Do not use a pressure washer.
Points of attention • All products must be unpacked immediately after delivery. • Every kind of (hard) wood will turn grey under the influence of UV radiation, weather and wind. The final colour depends on the starting colour. • Wood is a natural product that “works” and will shrink or expand depending on temperature and moisture content. • Hardwood can turn black when in contact with Corten steel, which will eventually turn gray. • Corten Steel should never be constantly in moisture, it should drain well and ventilate in all situations. • Corten Steel products are not (fully) rusted on delivery, we only use Corten steel type S355JOWP. • Coastal areas: We do not recommend using Corten steel within a radius of 2 km from a coastline. • During the weathering process rust residue can come off the product, which can result in stains. • Drilling / grinding in the material is not permitted.
Similar products
DIMENSIONS
height: 45 cm
width: 50 cm
length: 221 cm
weight: abt 100 kg
MATERIALS
seat, backrest: oiled exotic wood
seat and backrest reinforcement: varnished steel
bases: quartz conglomerate
INSTALLATION
The bench is installed by screwing it to the ground
height: 45 cm
width: 50 cm
length: 221 cm
weight: abt 100 kg
MATERIALS
seat, backrest: oiled exotic wood
seat and backrest reinforcement: varnished steel
bases: quartz conglomerate
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001702
DIMENSIONS
height: 77 cm
width: 57 cm
length: 421 cm
weight: abt 190 kg
MATERIALS
seat, backrest: oiled exotic wood
seat and backrest reinforcement: varnished steel
bases: quartz conglomerate
INSTALLATION
The bench is installed by screwing it to the ground
height: 77 cm
width: 57 cm
length: 421 cm
weight: abt 190 kg
MATERIALS
seat, backrest: oiled exotic wood
seat and backrest reinforcement: varnished steel
bases: quartz conglomerate
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001706
DIMENSIONS
height: 74 cm
width: 60 cm
length: 186 cm
weight: abt 54 kg
MATERIALS
seat, backrest: varnished softwood
bases: varnished cast iron
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat, backrest: teak, nut brown
Base: dark gray, black
height: 74 cm
width: 60 cm
length: 186 cm
weight: abt 54 kg
MATERIALS
seat, backrest: varnished softwood
bases: varnished cast iron
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat, backrest: teak, nut brown
Base: dark gray, black
SKU: 001109
DIMENSIONS
height: 43 cm
width: 50 cm
length: 60 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 43 cm
width: 50 cm
length: 60 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001263
Arched bench. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: R1350mm, H400mm, Width (cross section): 400mm.
Volume: 300 liters.
3 x modules (circle): outer diameter: Ø2700 / inner diameter Ø1900mm.
8-10 seats inside / 12-14 seats outside. A playground for 4-5 children is created inside the circular bench.
Combinations:
Combine "O" (circle, 3 modules) or "C" (2 modules) or "S" (2 or more modules) from the Loop Arc details.
Loop Arc details can also be combined with Loop benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4).
Fill the parts 3/4 with water (225 liters) / sand (225 kg) or fix them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: Stainless steel, glass blown
Also works as a mounting bracket. Therefore, B4 mounting brackets can be omitted when armrests are used.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: R1350mm, H400mm, Width (cross section): 400mm.
Volume: 300 liters.
3 x modules (circle): outer diameter: Ø2700 / inner diameter Ø1900mm.
8-10 seats inside / 12-14 seats outside. A playground for 4-5 children is created inside the circular bench.
Combinations:
Combine "O" (circle, 3 modules) or "C" (2 modules) or "S" (2 or more modules) from the Loop Arc details.
Loop Arc details can also be combined with Loop benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4).
Fill the parts 3/4 with water (225 liters) / sand (225 kg) or fix them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: Stainless steel, glass blown
Also works as a mounting bracket. Therefore, B4 mounting brackets can be omitted when armrests are used.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 137.110
, Delivery time: 6-8 nädalat
Angular pink. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating options in the space.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: L1400xB1400mmxH400mm, width (cross section): 400mm.
Volume: 250 liters.
3-4 seats inside / 4-5 seats outside.
Combinations:
Combine details into a loop like "O" (square, 4 modules) or "C" (2 modules) or "S" (2 or more modules).
Loop Corner details can also be combined with Loop Line and Loop Arc benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4). Fill them with water (160 liters) / sand (265 kg) or attach them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrest also works as a mounting bracket. may exclude armrest results B4 mounting brackets.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
One module: L1400xB1400mmxH400mm, width (cross section): 400mm.
Volume: 250 liters.
3-4 seats inside / 4-5 seats outside.
Combinations:
Combine details into a loop like "O" (square, 4 modules) or "C" (2 modules) or "S" (2 or more modules).
Loop Corner details can also be combined with Loop Line and Loop Arc benches to form interesting and unique shapes and combinations in urban spaces.
Assembly & fixing:
The modules are connected at both ends with clamps (B4). Fill them with water (160 liters) / sand (265 kg) or attach them to the ground. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrest also works as a mounting bracket. may exclude armrest results B4 mounting brackets.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 171.110
, Delivery time: 6-8 nädalat
