Clamp for traffic sign, 3mm opening, for 60mm post, short

- Dimensions: 850x850x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 255 kg

NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051

Adapter is perfectly suited for a quick installation of traffic signs.

Tool for tensioning and cutting stainless steel cable ties. Resistant to corrosion and oxidation. Ideally suited for Ball-lock ties made from various grades of stainless steel. The handle can be used to adjust the level of tension on the tie as needed, the built-in mechanism cuts off the excess section of the tie.
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Steel ground sleeve 60 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Steel ground sleeve 42 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw

Stainless steel band
w: 12 mm t: 0,6 mm l: 30 m