Road sign clamp 76mm one-sided

One-sided traffic sign clip for attaching to a 60mm pipe.
One traffic sign requires 2 clips.

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 100mm x 33 m
– orange-black print
– non-reflective

Ball-lock cable ties made of AISI 304 stainless steel, 201 provide excellent resistance to high temperatures, corrosion and extraordinary resistance to UV radiation. These cable ties are very easy to install.
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required

Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm

Package 100 pcs

- Dimensions: Ø500 x H300 mm
- Hole in the middle Ø 85 mm
- Weight: 80 kg

NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051

Folding sign holder

For quick securing and marking of construction sites.

- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg

The traffic sign is not included!