Column protection ø90 L700x700 h140 mm

Low guards are intended for separation and protection in areas where heavy loads are handled.

- material: REFLEX (technopolymer)
- color: yellow RAL 1018, black RAL 9005
- impact resistance: 5400 J
- dimensions: Ø150 (P) 1000 (K) 200 mm
- environment: −10 ºC to 60 ºC
- attached to the floor with chemical anchors

Sales unit: etc.

MPM guards are well suited for the protection of storage shelves and walls

Material: REFLEX (technopolymer)
Color: yellow RAL 1018, black RAL 9005
Impact resistance: 2400 J
Dimensions: ø150 L2000 h200 mm
TÜV certified according to AFNORNP P98-310

It is also possible to order longer fence profiles, ask for more information!
Post step 2 meters

The pole protector is suitable for poles from 260mm x 260mm to 320mm x 320mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.

- Dimensions of the opening in the middle of the pillar guard: 260*260mm/320*320mm
- Outer size: 600*600mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 23kg
- The product can be used at temperatures: -15c to +40c

Wall protection system to protect areas that are impacted frequently or subject to friction. Made of soft material.

- temperature resistance -10...60°C
- profile dimensions: 200x20mm x pikkus 4000mm

The two-level bumper system is used where there is an increased risk of impacts in places with higher thermal loads, for example:
in frozen product warehouses
in cold areas
in parking lots
on the ramps

We supply bumpers in a length of 4 m, and if necessary, you can adjust the length as needed.

Suitable for columns with dimensions of 450mm X 450mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Plastic crash barriers are extremely flexible and a good shock absorber, providing protection in a busy environment where heavy vessels are handled.

- material: REFLEX (technopolymer)
- color: yellow RAL 1018, black RAL 9005
- dimensions of the bar: (L) 80 mm (K) 300 mm
- barrier height: 450 mm
- dimensions of the base plate: 180 x 160 x 10 mm
- impact resistance: 3900 J
- environment: −10 ºC to 50 ºC
- fixed to the floor with M12 anchors (included) and chemical glue
- sales unit: linm