Construction ramp - 600x2000 mm

The marker post is made of bright 21mm HDPE, which does not become brittle in the cold. The main area of use is roadside marking in winter, but they are also suitable for other marking work.
Length 1.5m
50mm RA2 reflector

Site safety lamp - side mount.
The site lamp is tough, long-lasting and easy to install in a range of working environments. Suitable for all scaffolding, skip lugs, HERAS fencing and roadside barriers, as well as bolting onto flat surfaces.

- size: 120mm x 118mm x 95mm
- battery: 2 x AA ( not included)
- 1,500 hours performance
- dimmer switch
- 2 reziimi: flashing(1500h) and steady (750h)
- candela: 0.8 (flashing) / 0.95 (steady )
- protection class IP54
- BS EN 12352: 2006, L1
- LED yellow

Manual light bar for security functions, signaling, beaconing, etc.
It is a bar with handle and various signaling functions.
Great visibility, especially at night, thanks to its high intensity light effects.
It has 2 functions: red lit bar and red blinking bar.
For the selection of the light functions, there is a button on the handle.
It works with 2 1.5V batteries (type C)

Manual light bar for security functions, signaling, beaconing, etc.
Great visibility, especially at night, thanks to its high intensity light effects.
It works with 2 1.5V batteries (type C)

Durable ploughing stick made out of fiberglass.
Sharpened bottom end of the stick and top end with a cap.
20 cm reflective tape on the stick.
Set of 6 pcs

A construction site ramp designed to safely cross a construction trench.
It is made of polypropylene with steel reinforcement and non-slip pads.
The ramp has a width of 800mm and a length of 1400mm.
It can be interconnected with other ramps or end caps.
The maximum load capacity is 1000Kg.
Weight: 22 kg