Corner Protection TYPE Y 62x62 mm yellow-black 1m

Wall protection system to protect areas that are impacted frequently or subject to friction. Made of soft material.

- temperature resistance -10...60°C
- profile dimensions: 200x20mm x pikkus 4000mm

The two-level bumper system is used where there is an increased risk of impacts in places with higher thermal loads, for example:
in frozen product warehouses
in cold areas
in parking lots
on the ramps

We supply bumpers in a length of 4 m, and if necessary, you can adjust the length as needed.

The stainless steel corner guard provides protection against damage and dirt caused by the trolleys.
Suitable for public places such as kitchens, hospitals, laboratories, offices, schools, etc.

- dimensions: 40x40mm, length 1000mm, thickness 1mm
- two fastening options: with double-sided tape or glue

Knurled aluminum sheets are light and durable, easy to install and clean. In essence, they are maintenance-free and offer effective protection. Suitable for both indoor and outdoor conditions. It is possible to install using both anchors and special glue.

Knurled aluminum sheets EN AW-5754 H-114

Available in variable dimensions:
2.0 x 1000 x 2000mm
2.0 x 1250 x 2500mm
2.0 x 1500 x 3000mm
3.0 x 1000 x 2000mm
3.0 x 1250 x 2500mm
3.0 x 1500 x 3000mm
4.0 x 1000 x 2000mm
4.0 x 1250 x 2500mm
4.0 x 1500 x 3000mm
5.0 x 1000 x 2000mm
5.0 x 1250 x 2500mm
5.0 x 1500 x 3000mm
6.0 x 1000 x 2000mm
6.0 x 1250 x 2500mm
6.0 x 1500 x 3000mm

Knuffi pipe protection profile type R50
- made of durable polyurethane
- designed for pipe protection
- installation: with adhesive on the back of the protective guard
- suitable for both indoor and outdoor use (-40° to +100°C)
- fire-resistant, complies with DIN 4102 B2 classification
- dimensions: 70 x 35 mm, diameter 50 mm
- length: 1 m
- easy to cut to size
- color: yellow-black or red-white

Knuffi edge protection profile type F
- made of durable polyurethane
- designed for protecting surfaces and walls
- installation: using adhesive on the back of the protective guard
- suitable for indoor and outdoor use (-40° to +100°C)
- fire-resistant, complies with DIN 4102 B2 classification
- dimensions: 40 x 11 mm
- lengths: 1 m, 5 m, 50 m
- easy to cut to size
- color: yellow-black or red-white

Reinforced corner protection (ALU profile, lining + 2 end pieces.)
A wide range of colors allows you to match with other interior elements (see the color range under the product files).

- available in two lengths - 1m and 1.5m.
- reinforced aluminum profile
- wide range of colors
- textured surface finish
- fire safety with certificate
- easy to clean
- scratch resistant
- impact resistant
- durable
- with the PHZ hygiene certificate (the PZH certificate proves that this product is safe for health and the environment.)