GenieGrips®Mirrors
SKU: GG.MIRRORS
Unit: set
Qty: Out of Stock
Unit: set
Qty: Out of Stock
GenieGrips® loading mirrors add a new level of safety to any working warehouse. Mirrors allow forklift drivers to see the load around the forks.
Available in both wide and thin, these parabolic mirrors snap instantly to the vehicle with magnets (if desired, mirrors can also be installed with the double-sided tapes that come with the product); place them at the driver's eye level, adjust the angles and they are ready to go.
The mirrors are available in two versions: Slimview and Wideview.
Ask for a quote in the inquiry basket.
Available in both wide and thin, these parabolic mirrors snap instantly to the vehicle with magnets (if desired, mirrors can also be installed with the double-sided tapes that come with the product); place them at the driver's eye level, adjust the angles and they are ready to go.
The mirrors are available in two versions: Slimview and Wideview.
Ask for a quote in the inquiry basket.
Video
Eliminate critical blind spots in the driver's line of sight
Genie Grips charging mirrors eliminate critical blind spots in the driver's vision. Mirrors allow the driver to see around the forks and the load to significantly improve safety and reduce accidents, injuries, damage to goods and infrastructure.
Easily attached to a pole, Genie Grips charging mirrors are reliable, easy to use and more durable than camera systems.
These forward-facing mirrors eliminate the need to drive in reverse.
Suitable for all environments
Available in two versions: Slimview and Wideview, Genie Grips charging mirrors are suitable for everything from small warehouses to large factories and everything in between.
Slimview mirrors:
• For use in narrow spaces.
• Fits in the forklift footprint.
• Target forks with compressed fore sight.
• Suitable for smaller forklifts.
Wide view mirrors:
• For use in open areas with high traffic.
• Can reach beyond the truck's footprint.
• Forward facing forks with panoramic view.
• Suitable for larger forklifts
Significantly improves safety
Genie Grips loading mirrors allow drivers to see around the load. This helps prevent damage and improves safety, efficiency, and reduces driver stress and potential injuries.
• Made of non-marking and oil-resistant material
• Easy to install and remove.
• Magnets enable the mirrors to be firmly attached to the mast, at driver's eye level.
Genie Grips charging mirrors eliminate critical blind spots in the driver's vision. Mirrors allow the driver to see around the forks and the load to significantly improve safety and reduce accidents, injuries, damage to goods and infrastructure.
Easily attached to a pole, Genie Grips charging mirrors are reliable, easy to use and more durable than camera systems.
These forward-facing mirrors eliminate the need to drive in reverse.
Suitable for all environments
Available in two versions: Slimview and Wideview, Genie Grips charging mirrors are suitable for everything from small warehouses to large factories and everything in between.
Slimview mirrors:
• For use in narrow spaces.
• Fits in the forklift footprint.
• Target forks with compressed fore sight.
• Suitable for smaller forklifts.
Wide view mirrors:
• For use in open areas with high traffic.
• Can reach beyond the truck's footprint.
• Forward facing forks with panoramic view.
• Suitable for larger forklifts
Significantly improves safety
Genie Grips loading mirrors allow drivers to see around the load. This helps prevent damage and improves safety, efficiency, and reduces driver stress and potential injuries.
• Made of non-marking and oil-resistant material
• Easy to install and remove.
• Magnets enable the mirrors to be firmly attached to the mast, at driver's eye level.
Similar products
GenieGrips® Stik-It Pads are a self-adhesive solution for a non-slip, product protection product
and to reduce noise. It is the perfect anti-slip solution in your work environment.
MAIN OUTLINES
• Non-slip surface
• Avoiding damage to goods
• Fork surface protection
• Non-stick rubber compound
• Suitable for use in the temperature range -40 °C to +110 °C
• Oil-resistant rubber compound
• Attaches directly to lifter pins
• Easy to install and remove.
• Easily trimmed to fit
• Can be used side by side with wider forks
PLACES OF USE
• Finished goods warehouses
• Chemical and lubricant warehouses
• Food and drink
• Metal and plastic
• General warehouse
• Frozen and chilled
• External environments
• Narrow passages
and to reduce noise. It is the perfect anti-slip solution in your work environment.
MAIN OUTLINES
• Non-slip surface
• Avoiding damage to goods
• Fork surface protection
• Non-stick rubber compound
• Suitable for use in the temperature range -40 °C to +110 °C
• Oil-resistant rubber compound
• Attaches directly to lifter pins
• Easy to install and remove.
• Easily trimmed to fit
• Can be used side by side with wider forks
PLACES OF USE
• Finished goods warehouses
• Chemical and lubricant warehouses
• Food and drink
• Metal and plastic
• General warehouse
• Frozen and chilled
• External environments
• Narrow passages
SKU: GG.STICKIT
, Qty: Out of Stock
Loads during transportation can be as large as possible. If this movement moves the product against the forklift, the impact can cause it. GenieGrips® pads act as bumpers that absorb shock and improve product damage during lifting, loading and stowing.
The pads are attached to the carriage of the lift using three powerful magnets. You don't need screws, bolts, glue or other tools.
Made of oil-resistant material.
The pads are highly visible thanks to their yellow color.
Farm temperature -40 °C to 110 °C.
GenieGrips® pads are securely designed to be combined with other products in the same line (GenieGrips® Mats and GenieGrips® Caps) to ensure full protection of the forklift blades.
The product is available in different sizes. Ask for the price in the inquiry basket.
The pads are attached to the carriage of the lift using three powerful magnets. You don't need screws, bolts, glue or other tools.
Made of oil-resistant material.
The pads are highly visible thanks to their yellow color.
Farm temperature -40 °C to 110 °C.
GenieGrips® pads are securely designed to be combined with other products in the same line (GenieGrips® Mats and GenieGrips® Caps) to ensure full protection of the forklift blades.
The product is available in different sizes. Ask for the price in the inquiry basket.
SKU: GG.CUSHIONS
, Qty: Out of Stock
, Delivery time: 2 nädalat
During transport, forklift loads can shift, slide,
become unstable and even fall. This creates a dangerous situation in the workplace, especially if the load contains chemicals or other hazardous materials.
Bare forklift blades can scratch and damage products and packaging, resulting in product loss and additional cost.
GenieGrips® Mats are protective mats that cover the top and sides of the forklift blades. They are manufactured from compound rubber with anti-slip properties that provide exceptional grip and load stability. The patterned surface prevents the load from sliding or falling during fast movement or sudden braking. The oil-resistant material leaves no traces and can withstand temperatures from -40°C to 110°C.
Installation and removal is quick and easy using a secure locking hook mechanism.
Available in different lengths and widths, GenieGrips®Mats are suitable for all types of forklifts and are a particularly effective way to reduce the risk of injury and damage.
MAIN OUTLINES
• Anti-slip surface
• Avoiding damage to goods
• Fork surface protection
• Non-stick rubber compound
• Suitable for use in temperature ranges from -40 °C to +110 °C
• Oil-resistant rubber compound
• Easy to install and remove.
• Available in different sizes - Ask for an offer!
PLACES OF USE
• Finished goods warehouses
• Chemical and lubricant warehouses
• Food and drink
• Metal and plastic
• General warehouse
• Frozen and chilled
• External environments
• Narrow passages
become unstable and even fall. This creates a dangerous situation in the workplace, especially if the load contains chemicals or other hazardous materials.
Bare forklift blades can scratch and damage products and packaging, resulting in product loss and additional cost.
GenieGrips® Mats are protective mats that cover the top and sides of the forklift blades. They are manufactured from compound rubber with anti-slip properties that provide exceptional grip and load stability. The patterned surface prevents the load from sliding or falling during fast movement or sudden braking. The oil-resistant material leaves no traces and can withstand temperatures from -40°C to 110°C.
Installation and removal is quick and easy using a secure locking hook mechanism.
Available in different lengths and widths, GenieGrips®Mats are suitable for all types of forklifts and are a particularly effective way to reduce the risk of injury and damage.
MAIN OUTLINES
• Anti-slip surface
• Avoiding damage to goods
• Fork surface protection
• Non-stick rubber compound
• Suitable for use in temperature ranges from -40 °C to +110 °C
• Oil-resistant rubber compound
• Easy to install and remove.
• Available in different sizes - Ask for an offer!
PLACES OF USE
• Finished goods warehouses
• Chemical and lubricant warehouses
• Food and drink
• Metal and plastic
• General warehouse
• Frozen and chilled
• External environments
• Narrow passages
SKU: GG.MATS
, Qty: Out of Stock
