Categories

Handheld Digital Inclinometer

SKU: KM1
Unit: pc
Delivery time: 5-7 tööpäeva
KM-1 is a surface slope measuring device or digital inclinometer used to measure the slope or angle of roads, floors, pipes and other objects or surfaces with inclination.
KM-1 handheld digital inclinometer is lightweight, portable and can be used by a single operator. The inclinometer includes an aluminium bar with a ruler an electronic unit with an LCD display that is fastened to the bar.
The slope is measured in degrees, percentages or inches per foot. A sound signal is available to help determine the 0- slope of the surface.

Features and Benefits
Wide slope measuring range
LCD with measurement results
1.2 m bar included
20 mm or 50 mm wedge available
Add to inquiry
Similar products
Technical specifications:
- Dimensions: 600 x 51 x 25 mm
- accuracy: ± 0.1 °
- LCD screen
- laser
- operating temperature -10 ° C… + 50 ° C
- storage temperature: -30 ° C… + 70 ° C
- power supply: 9V CC
Weight: 0.475 kg

Accurate and fast digital laser tracking also allows you to measure in the upside down position (180 degrees "upside down"). If the reading on the LCD screen cannot be read immediately, the value can be fixed (sounds will be indicated when the reading is fixed).

Included:
digital laser screens
carrying case
batteries
SKU: DL60L ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
79,00 €
Magnification: 32x
Telescope diameter: 42 mm
Telescope length: 215 mm
Resolving power: 3,5"
Field of view: 1°20'
Minimum focus: 0,3m
Accuracy: 1,5mm / 1km
Automatic compensator
Water resistance IPX6
Operating temperature range -20°C do +50°C
Size 130 x 215 x 140mm
Weight 1,75kg
SKU: N32x ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
184,00 €
Magnification: 24x
Telescope diameter: 42 mm
Telescope length: 215 mm
Resolving power: 3,5"
Field of view: 1°20'
Minimum focus: 0,3m
Accuracy: 2,0mm / 1km
Automatic compensator
Water resistance IPX6
Operating temperature range -20°C do +50°C
Size 130 x 215 x 140mm
Weight 1,75kg
SKU: N24x ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
174,00 €
Laser control system for construction machinery. The receiver is equipped with either strong magnetic fasteners or clamps (please specify which fastener you want the product with).
Technical specifications:

- fine accuracy: +/- 10mm
- coarse accuracy: +/- 20mm
- Batteries / Charger 7.2 V NiMh / 2500mAH
- Reception area 25 cm, 360 °
- Working time 40h
- Charging time 15h
- Operating temperature -20°C - + 50°C

Size 280x280x130mm
Weight 5.5 kg
SKU: MC-1D ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
819,00 €
Technical specifications:

-32x magnification
-Electronic measurement ± 1.0mm / km
-Visual measurement ± 1.0 mm / km
-Accuracy of distance measurement - D ≤ 10m <± 10mm
-Accuracy of distance measurement - 10m <± 0.1% D
-Accuracy of distance measurement - D> 50m <± 0.2% D
-Measurement time <3 seconds
-Compensator type magnetic
-Compensator operating range and accuracy ± 15 '/ 0.3 ”/ min
-Power Li-ion, 2200mAh, ca. 20h
-Internal data storage of 1000 records
-Data storage interface micro-USB
-Resistance class IP55
-Operating temperature range -20 ° C to + 50 ° C
-Dimensions 240 x 130 x 205 mm
-Weight 1.9 kg

Electronic tracks The EL-32 is a high-end device that provides fast and accurate automatic and classic measurement even in very difficult operating conditions. Dimensions are read automatically and the device provides information on altitude differences and distances. The measurement results are displayed on a large, readable, backlit LCD screen. The device allows you to save measurements and export them to a computer.

Included:
electronic level
PC software
USB cable
plumb bob
manual
case
SKU: EL-32 ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
549,00 €
Fast and accurate tape to use – 50m
Durable, clearly visible print
SKU: ST-50B ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
21,99 €