HUG tower protection L500x500 h1100 mm

Set contains 2 pieces

Wall protection system to protect areas that are impacted frequently or subject to friction. Made of soft material.

- temperature resistance -10...60°C
- profile dimensions: 200x20mm x pikkus 4000mm

The two-level bumper system is used where there is an increased risk of impacts in places with higher thermal loads, for example:
in frozen product warehouses
in cold areas
in parking lots
on the ramps

We supply bumpers in a length of 4 m, and if necessary, you can adjust the length as needed.

Double horizontal borders provide protection in areas with high traffic congestion and heavy vessels.

- material: REFLEX (technopolymer)
- color: yellow RAL 1018, black RAL 9005
- dimensions: Ø150 (K) 500 mm
- dimensions of the base plate: 180 x 160 x 10 mm
- impact resistance: 3400 J
- TÜV certified according to DIN EN 15512: 2010-09
- environment: −10 ºC to 50 ºC
- minimum order quantity: 2 meters
Fastened to the floor with M12 anchors (included) and with chemical glue (not included)

Minimum order quantity: 2 meters

Suitable for columns with dimensions between 160mm x 160mm and 260mm x 260mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.
Equipped with red and white reflective stickers.

Loading bays protections are shock-proof solutions which are set up near loading doors.
They avoid possible slipping, falling and flipping of moving vehicles near open and unmanned loading bays.
In case of impact, this product is sturdy and flexible. Its mechanical properties last over time. It suits loading docks of 2,4 and 2,5 meters.
Fixing accessories are included.

Available in three different sizes:
- L 2400-2600mm
- XL 2605-2800mm
- XXL 2805-3000mm

Gate with lift opening. Equipped with ergonomic handle and safety lock, allowing easy passage of pedestrians and trucks. Solution that can be combined with the Pedestrian 150 protective barrier and link system. Minimum width 1100 mm, maximum width 2000 mm. Fixing accessories included.

- material: REFLEX (technopolymer)
- color: yellow RAL 1018, black RAL 9005
- impact resistance: 650 J
- dimensions: ø90 (H) 1150 mm
- environment: −10 ºC to 50 ºC