LOOP Cone backrest/planter

The Loop Cone backrest is a multipurpose product. When placed in the middle of the LOOP, it becomes both a backrest and a planter. As a stand-alone, it can be used both as an upward and downward facing planter.

Material:
Rotational molded polyethylene, 6mm thick, painted.
Molded in one piece. UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Top plate: high pressure laminate

Surfaces and friction
The mold is sandblasted to obtain a rough surface that reduces surface slippage.

Dimensions
Outer diameter: Ø1130mm/Ø810 x H700mm. Inner diameter: Ø720/380mm
Internal volume e.g. plants: 170L
Top plate: Ø380mm, color anthracite, fixed with clamps.

Combinations:
The Loop Cone works as a standalone table or planter, or in combination with the #135 Loop, #137 Loop Arc and #157 HopOp500.

Installation:
The Loop Cone can be filled with water or sand through an integrated tube or attached to the ground with fittings.

Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)

Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived with vinyl cleaner or similar