Roadstud 120x120x28 mm yellow

Roadstuds: durable, unbreakable, solid body and reflectors
– size: 120x220x28 mm
– weight: 0,22 kg
– material: PP
– colour : yellow
– fixing to concrete with screw kit
– operating temperature range: -20°C-/+60°C
– high visibility 2+2 reflectors

Road stud: durable, unbreakable, solid body and reflectors
– size: 100x220x32 mm
– weight: 0,24 kg
– material: PPC
– color: yellow
– fixing to concrete with screw kit
– operating temperature range: -20°C-/+60°C
– high visibility 3+3+3 reflectors

Wide range to use: on roads, streets, parking lots, pedestrian crossing, traffic islands, shoulder lines, tunnels, subways and all blind points required to mark.

Roadstud
– size: Ø120 mm
– material: PE
– colour : yellow
– double-sided reflectors

Road marking for roundabouts and curbs
– dimensions: Ø75x25 mm, anchor 40 mm
– material: plastic
– color: grey
– installation: on curbs with polyurethane adhesive
– visibility: 360°
– complies with EN 1463 standard
– reflector color options: white, red, yellow

The anchored retroreflective road stud is a modern road marking solution that significantly improves the visibility of road edges. It is especially effective in the dark and during rainy weather, providing drivers with better guidance on the road, which in turn enhances traffic safety.

Specifications:
Dimensions: 110x60xH17 mm, anchor H50 mm
Material: Plastic
Color: Grey
Installation: Fixed to the surface using bitumen or polyurethane adhesive. Requires drilling two holes (Ø20 mm, 55 mm deep, with 50 mm spacing).
Compliance: Complies with the EN 1463 standard
Reflector color options: White/white, white/red, red/red, yellow/yellow

The anchored reflective road marker is a modern road marking solution that significantly improves the visibility of road edges. It is especially effective in the dark and during rainy weather, providing drivers with better guidance on the road, which in turn enhances traffic safety. They are ideally suited for locations where regular road paint wears out quickly, especially in curves, roundabouts, exits, and other critical areas that require special attention from the driver.

Specifications:
Dimensions: 107.5x90xH17 mm, anchor H50 mm
Material: Plastic
Color: Grey
Installation: Fixed to the surface using bitumen or polyurethane adhesive. Requires drilling a hole (Ø10 mm, 55 mm deep).
Compliance: Complies with the EN 1463 standard
Reflector color options: White/white, white/red, red/red, yellow/yellow