Roadstuds 105x105x20 mm

aluminium marking nail
Ø100 mm, shaft:60 mm

Roadstud
– size: Ø120 mm
– material: PE
– colour : yellow
– double-sided reflectors

- made of glass
- diameter 50 mm
- height from the ground after installation: 11mm
- 100J
- load capacity 27T
- EN 1463-1 and 2

Suitable for installation on a concrete surface.
about:
concrete ties, (double) paving stones, tiles, etc.

ATTENTION!
Do not use on asphalt!

- Li-ion with solar battery
- diameter 80 mm
- height from the ground after installation: 6mm
- driveable, limited
- LED, 360˚
- expected life of 8 years
- IP68
- recommended temperature range -20˚ > +70˚
- Charging capacity: 100% in 3 hours at 100 KLux
- Light output: 1.000 mcd

Installation: Drilling and installation, two-component adhesive.
Suitable for: asphalt, concrete, natural stones, wood.

Road surface reflectors are particularly effective in places where there is a high risk of accidents, sharp curves, winding roads with little demarcation or where public lighting is not sufficient or environmentally friendly.

-Power supply: Solar panel (monocrystalline 2.5 V / 0.25 W)
-Battery: NI-MH 1.2 V / 1500 MAH
- LED: φ5; 6 pcs ultra bright LED
-Work model: permanent or flashing
-Waterproof: IP68
-Flexible solar panel, resistant to 20 tons of pressure
-Visible at a distance of 800 m
-One-way or two-way LEDs;

Installation: Can be installed in both asphalt and concrete
For example: double pavers, RWS tires, regular tiles, etc.

Extremely durable road surface reflector (Cat's eye) made of aluminum.
– dimensions: 100x100 mm
– weight: 0.4 kg
– material: aluminum
– color: silver
– fastening: The anchor leg is glued to asphalt or concrete with a two-component adhesive
– operating temperature range -30°C-/+60°C
– high visibility: 1+1 reflectors (Cat-eyes)