Round steel tube galvanized Ø33,7 mm

The clamps are made of hot-dip galvanized malleable iron, painted black.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Short T-clamp. Ensures a cross connection between two pipes. This fitting cannot be used to connect two horizontal pipes inside a pipe clamp.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Two Socket Slope Cross. Joint clamp between the middle rail and upright on slope railings up to 11°.

Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.