Round steel tube galvanized Ø33,7 mm

Swivel Base Plate (Unisize). For fixing structures to wall or floor, usually used with Type 42.

Round tube D=48.3mm
wall thickness 2.9 mm
painted black with powder
maximum profile length 2 m

Steel wire is woven into the elastics of the banner attachment. The space between the fabric and the frame varies from 4 to 5 cm.
The rubbers are UV-resistant and long-lasting.

Specifications:
- Length: 160mm
- Rubber thickness: 6mm
- Rubber capacity 100kg

The distance of the print from the inner frame depends on the diameter of the frame tubes:
Tube 42 mm - Distance 5 cm
Tube 48 mm - Distance 4 cm

Support beam end clamp. A strong support beam clamp for fixing a vertical post.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Black, mounting bracket.
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Reducing Crossover 90°. Used as Type 28. reduction fitting makes it possible to design structures in two different tube diameters - horizontal Ø42.4 and vertical Ø33.7mm.