Snow pole Ø20mm 1,5m, 50mm RA2 tape

Road, street, wall or post sign with reflector. Due to its curved shape, it is ideal for marking pots at the gate, etc.
Strong black and white plastic construction. Convex shape (arched).
Mounting hardware is not included.
Post dimensions: 88 x 1074 x 25 mm
Reflector dimensions: 17 x 180 mm

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: orange

Hand Stop signal
- size: Ø220
- foil reflective class RA3

Professional construction site marking for building construction and civil engineering, construction sites and road construction. Also can be used in tunnelling and mining.
Patented one-hand safety cap with easy-touch release for improved functionality and increased safety. Guaranteed marking without painted fingers.
Colour: white

Traffic control baton PVC
- dimensions: Ø150 H440 mm
- reflective film class RA2

A construction site ramp designed to safely cross a construction trench.
It is made of polypropylene with steel reinforcement and non-slip pads.
The ramp has a width of 600mm and a length of 2000mm.
It can be interconnected with other ramps or end caps.
The maximum load capacity is 1000 kg.
Weight: 23 kg