SOPPEC TRACING PRO 750ml, red

The marker post is made of bright 21mm HDPE, which does not become brittle in the cold. The main area of use is roadside marking in winter, but they are also suitable for other marking work.
Length 1.5m
50mm RA2 reflector

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: orange

The brand new SOPPEC DRIVER™ Line marking trolley is the best on the market: thanks to its stability, simplicity and unique design, it ensures straight lines on smooth or textured surfaces, both indoors and outdoors.
The trolley is intended for use only with SOPPEC TRACING® PRO paint aerosol cans. Simply adjust the handle from the transport position to the work position, place the aerosol can in the holder and the work can begin.

Tracing PRO marker paint. Yellow, RAL 1023
Includes an exclusive, versatile, pre-assembled nozzle that can be used with the SOPPEC DRIVER™ trolley or by hand.
Label duration: 12 months


- Better clogging resistance than any other competitor.
- Enables drawing a 75 mm wide line up to 90m, with one aerosol can (result obtained at optimal speed and on smooth ground)
- Dry to the touch in 11 minutes, ready for light traffic in 60 minutes and 24 hours for heavy traffic.
- Excellent contrast, brightness, durability - industrial grade marking ink that can withstand the toughest conditions (UV, solvents, pedestrian, car or forklift traffic) indoors or outdoors.
- NSF certification (food contact and storage).
- Xylene-free and guaranteed free of chlorinated solvents and aromatic compounds.

PROPERTIES
Thermoplastic acrylic resin.
Satin finish.
Mineral and organic pigments, do not contain heavy metals such as lead or cadmium.

Aerosol can 1000 ml gross / 750 ml net.

Tracing PRO marker paint. Black, RAL 9017
Includes an exclusive, versatile, pre-assembled nozzle that can be used with the SOPPEC DRIVER™ trolley or by hand.
Label duration: 12 months

- Better clogging resistance than any other competitor.
- Enables drawing a 75 mm wide line up to 90m, with one aerosol can (result obtained at optimal speed and on smooth ground)
- Dry to the touch in 11 minutes, ready for light traffic in 60 minutes and 24 hours for heavy traffic.
- Excellent contrast, brightness, durability - industrial grade marking ink that can withstand the toughest conditions (UV, solvents, pedestrian, car or forklift traffic) indoors or outdoors.
- NSF certification (food contact and storage).
- Xylene-free and guaranteed free of chlorinated solvents and aromatic compounds.

PROPERTIES
Thermoplastic acrylic resin.
Satin finish.
Mineral and organic pigments, do not contain heavy metals such as lead or cadmium.

Aerosol can 1000 ml gross / 750 ml net.

Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
Rapid drying: approximately 10 min.
Very good autonomy and coverage ability: 1 aerosol of fluorescent spray paint is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
Temperature range: -20°C to 50°C. Fluo TP is available in a wide range of colours.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Color: green