STORR 1500 BENCH
SKU: STBE.1500.Ct
Unit: pc
Unit: pc
The STORR series is attractive due to its simplicity, both visually and physically
in terms of price. The table and chair from the STORR series together form a beautiful picnic set.
Thanks to the modular legs of the STORR series, the bench can be conveniently connected to the ground.
Picnic sets, trash cans and bicycle racks are also available in the same series.
Dimensions: 1500*440*430mm
The STORR series has:
• Mounting holes for surface mounting
• Warranty 5 years
Frame material:
• Corten steel 10 mm
• Galvanized steel 10 mm + 2 layers of powder paint
Seat material:
• Material: Garapa wood
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
in terms of price. The table and chair from the STORR series together form a beautiful picnic set.
Thanks to the modular legs of the STORR series, the bench can be conveniently connected to the ground.
Picnic sets, trash cans and bicycle racks are also available in the same series.
Dimensions: 1500*440*430mm
The STORR series has:
• Mounting holes for surface mounting
• Warranty 5 years
Frame material:
• Corten steel 10 mm
• Galvanized steel 10 mm + 2 layers of powder paint
Seat material:
• Material: Garapa wood
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Points of attention • All products must be unpacked immediately after delivery. • Every kind of (hard) wood will turn grey under the influence of UV radiation, weather and wind. The final colour depends on the starting colour. • Wood is a natural product that “works” and will shrink or expand depending on temperature and moisture content. • Hardwood can turn black when in contact with Corten steel, which will eventually turn gray. • Corten Steel should never be constantly in moisture, it should drain well and ventilate in all situations. • Corten Steel products are not (fully) rusted on delivery, we only use Corten steel type S355JOWP. • Coastal areas: We do not recommend using Corten steel within a radius of 2 km from a coastline. • During the weathering process rust residue can come off the product, which can result in stains. • Drilling / grinding in the material is not permitted.
Similar products
DIMENSIONS
height: 54 cm
width: 53 cm
length: 182 cm
weight: abt 45 kg
MATERIALS
seat: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 54 cm
width: 53 cm
length: 182 cm
weight: abt 45 kg
MATERIALS
seat: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001256
DIMENSIONS
height: 45 cm
width: 97 cm
length: 178 cm
weight: abt 86 kg
MATERIALS
seat: varnished softwood or oiled exotic wood
seat reinforcement: varnished steel or stainless steel
bases: sandblasted concrete or painted concrete and varnished steel or stainless steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat: teak, nut brown, exotic wood
Seat reinforcement: light gray, dark gray, black
Base, sandblasted concrete: natural gray
Base, painted concrete: gray, light graphite, graphite
Base, steel: light gray, dark gray, black
height: 45 cm
width: 97 cm
length: 178 cm
weight: abt 86 kg
MATERIALS
seat: varnished softwood or oiled exotic wood
seat reinforcement: varnished steel or stainless steel
bases: sandblasted concrete or painted concrete and varnished steel or stainless steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat: teak, nut brown, exotic wood
Seat reinforcement: light gray, dark gray, black
Base, sandblasted concrete: natural gray
Base, painted concrete: gray, light graphite, graphite
Base, steel: light gray, dark gray, black
SKU: 001324
DIMENSIONS
height: 89 cm
width: 65 cm
length: 182 cm
weight: abt 125 kg
MATERIALS
seat: oiled exotic wood
seat reinforcement, backrest, bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 89 cm
width: 65 cm
length: 182 cm
weight: abt 125 kg
MATERIALS
seat: oiled exotic wood
seat reinforcement, backrest, bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001273
DIMENSIONS
height: 79 cm
width: 55 cm
length: 201 cm
weight: abt 220 kg
MATERIALS
seat, backrest: varnished softwood
seat reinforcement: varnished steel
bases: sandblasted concrete or painted concrete
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat, backrest: teak, nut brown
Seat reinforcement: light gray, dark gray
Base, sandblasted concrete: natural gray
Base, painted concrete: gray, light graphite, graphite
height: 79 cm
width: 55 cm
length: 201 cm
weight: abt 220 kg
MATERIALS
seat, backrest: varnished softwood
seat reinforcement: varnished steel
bases: sandblasted concrete or painted concrete
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat, backrest: teak, nut brown
Seat reinforcement: light gray, dark gray
Base, sandblasted concrete: natural gray
Base, painted concrete: gray, light graphite, graphite
SKU: 001331
Round with pink integrated LED lighting. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating options in the space.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Ideal for 4-6 people.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Outer diameter Ø1800mm.
Inner diameter Ø1000mm.
Height 400mm.
Volume: 540L.
4-6 seats inside / 6-8 seats outside.
Light function
The integrated LED light tube is installed in the middle of the product and shines through the translucent polyethylene surface with a single brightness. Optimum light output is achieved with a light unit of 20 lux.
Light unit
Integrated LED light tube (Duralight, Semko approval), halogen white, 4m./10W for orange/yellow bench and 8m./20W for red.
Direct 230V connection box through the access hatch at the bottom. The possibility of decontamination in the box.
Density and life:
IP44 / LED light tube, approx. 20,000 hours ~ min. 6 years of light in the dark hours.
Fixation:
Fill with water (250 liters) / sand (250 kg) through integrated caps or
set in the soil. Clamps must be ordered separately.
Color choice:
Red, orange, yellow.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, it is perfect for furnishing schools and kindergartens as well as outdoor areas of amusement parks, homes, spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Ideal for 4-6 people.
Design: AART designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Outer diameter Ø1800mm.
Inner diameter Ø1000mm.
Height 400mm.
Volume: 540L.
4-6 seats inside / 6-8 seats outside.
Light function
The integrated LED light tube is installed in the middle of the product and shines through the translucent polyethylene surface with a single brightness. Optimum light output is achieved with a light unit of 20 lux.
Light unit
Integrated LED light tube (Duralight, Semko approval), halogen white, 4m./10W for orange/yellow bench and 8m./20W for red.
Direct 230V connection box through the access hatch at the bottom. The possibility of decontamination in the box.
Density and life:
IP44 / LED light tube, approx. 20,000 hours ~ min. 6 years of light in the dark hours.
Fixation:
Fill with water (250 liters) / sand (250 kg) through integrated caps or
set in the soil. Clamps must be ordered separately.
Color choice:
Red, orange, yellow.
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 136.01
, Delivery time: 6-8 nädalat
Straight bench. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 140.12
, Delivery time: 6-8 nädalat
