Taldmik D=60mm torule

The expander is suitable for tube with a diameter of 48,3 mm. With the aid of an expander a swivel wheel can be attached to a tube.

Steel wire is woven into the elastics of the banner attachment. The space between the fabric and the frame varies from 4 to 5 cm.
The rubbers are UV-resistant and long-lasting.

Specifications:
- Length: 160mm
- Rubber thickness: 6mm
- Rubber capacity 100kg

The distance of the print from the inner frame depends on the diameter of the frame tubes:
Tube 42 mm - Distance 5 cm
Tube 48 mm - Distance 4 cm

Plastic cap Ø35 mm, black

Dimensions:
D (outer diameter): 35mm
C (height of thread part): 5mm
D1 (thread diameter from the bottom edge): 25.8mm
D2 (thread diameter from thread edge): 32.8mm

Black, mounting screw
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Plastic cap used to plug the end of the tube.

Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Plastic cap used to plug the end of the tube.

Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.