Template for tactile guide strips 1.6 x 29.5 cm

Rubber „Brajl” plate is made of vulcanized rubber color, a kind of road markings to facilitate the movement of person with disabilities. "Brajl" plate is an element of road safety for blind people which helps them to safely overcome the obstacles in their way. Advantage of our plate is that it can be installed without interfering with existing pavement. Is flexible of high strength characteristic. To apply it to existing concrete or asphalt surfaces is recommended to use an adhesive polymer.
Size: 600 x 300 x 65 mm

The tactile rubber tile is made of vulcanized rubber.
Warning tiles at bus stops, metro stations and railway platforms, and roadside architectural elements for the blind and visually impaired. The advantage of the tactile rubber tile is that it can be installed on the existing surface. Flexible and with good durability. To install it on existing concrete or asphalt surfaces, using an adhesive polymer is recommended.
Hard-wearing surface, resistant to weather and ageing.

Dimensions: 600 x 300 x 65 mm

RVS 316 guiding line: 280x35x5 mm
Mounting:
a) Anchor(s) M6x20: drilling and bonding 2-component glue
b) Without anchor(s): bonding 2-component glue

Patterns:
Diamond
Brushed (min. order quantity 1000 pcs)
Stripe (min. order quantity 1000 pcs)
Black (min. order quantity 1000 pcs)

A tactile directional plate is the tactile marking system of the surface. Directional tiles guide blind and visually impaired people in public spaces.

- tile dimensions: 300x300mm or 400x400mm, height 7,8 mm
- tile base thickness: 2 mm
- standard color range: white, yellow (RAL1023), light gray (RAL7042), anthracite gray (RAL7016), black (RAL9005)
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer (R-12/R-13 slip resistance

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black

- stainless steel 316
- Ø 35 mm
- height: 5 mm
- mounting:
a) M6x20 anchor and bonding 2-component glue
b) without anchor and bonding 2-component glue

Patterns:
- diamond
- brushed
- stripe
- black