Traffic buffer 100 km 3m

Rubber 5-core cable protection
Made of : rubber and polyethylene
5xØ34 mm
Cable protection dimensions: 910x500x48 mm
Load bearing capacity: 15T per axle
Can be fixed on the ground with asphalt, concrete fixation, or glue
NOT RECOMMENDED for forklifts traffic with polyamide or rubber
wheels

The minimum order quantity is 10 pcs

- 13x D200 LED, L8H (EN12352)
- 4 modes: OFF, right arrow, left arrow and cross
- also includes a control panel with a 15m cable
- 12 / 24V
- Dimensions: 900 x 900 x 105 mm

Set of two ϕ 200 pulsators – simultaneous flash
One lamp is a control lamp, the other is controlled, the lamps are connected by a cable

- LED lamp Ø200mm
- yellow LEDs
- housing Ø210mm
- 12 / 24V
- L8H
- Flashing mode 120xmin
- dim sensor (100% during the day, 50% in the dark)
- set includes 2 lamps + mounting accessories for Ø60mm tube

Temporary traffic management marking tape, suitable for use on longer periodic objects.
Type II, P5
Yellow, with reflective glass beads
Width 120mm
Rolls 100m
Durable at least 1 million crossings
Complies with DIN EN 1436

LED (lm 1x58), 120 ° ≈ 20 cd, yellow, 1-sided
Light class L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (with 1 Ah battery), 500 (with 2 Ah battery)
With twilight sensor (100% white 30% in the dark)
Fastening: for fastening to a clamp, cone or pipe
Moisture-proof switch
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

8 MO102 lamps with a diameter of 10 cm, each lamp has 18 LEDs with a power of 1400 cd
the arrow can be permanently mounted to the rear of the vehicle using rubber pads or on magnets
dimensions: 60x60
12V power supply for the battery car
included two small round switches on the function on / off and day/night mode
The 60x10x8 arrow can be permanently mounted to the rear of the vehicle using rubber pads or magnets
- Dimensions: 60x60
- 12V power supply for car battery.
- Cable control
The light warning and signaling device has all the certificates in the field of:
- light - Class L2H
- effective time - Class O1
- continuity of the light emitted - Class F3
EN12352 L2H certificate