Type 18, Three-way elbow 90°, black - 40 mm

Rectangular Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Steel galvanized square 40 mm tube profile / socket of 2 mm thickness. This profile has a standard trade length of 6
meters, but can always be cut to size for you. Suitable for our square tubefittings.
Black

Maximum length for shipping by courier is 2 meters!

Collar Plate Double Side 90°. Panel fixing with two lugs also used for locking gates.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.

Hook twisted - 40 mm. Suited for making coat hangers and the like.
Suitable for square tube 40x40 mm