Type 2, Short T-piece, black 25x25xmm

Angle of continuous upright with lip - 25 mm. Corner connection (90°), where the vertical tube runs through the clamp.

This fitting can be used where a join is required in the horizontal tube.
Suitable for square tube 25 x 25 mm

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp. Please note: that rust may develop when used outdoors.

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.

Steel galvanized square 25x25 mm tube profile / socket of 2 mm thickness.
This profile has a standard trade length of 6 meters, but can always be cut to size for you.
Suitable for our square tubefittings.

The advantage of black color is that the color goes very deep into the material, which prevents the pipe from corroding too quickly.
The black tubes are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Maximum length for shipping with couriers is 2 meters!

Angle of continuous upright with lip - 25 mm. Corner connection (90°), where the vertical tube runs through the clamp.