Type 22S, Two Socket Slope Cross (0-11°) Ø33,7

Round tube D=33.7 mm
wall thickness 2.65 mm
painted black with powder
maximum profile length 2 m

Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.

Internal Coupling. A streamlined flush joint in two tubes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.

Collar Plate Double Side 90°. Panel fixing with two lugs also used for locking gates.