Type 26O, Add-on Four Socket Cross Ø48.3 mm

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Round tube D=33.7 mm
wall thickness 2.65 mm
painted black with powder
maximum profile length 2 m

Round tube D=42.4mm
wall thickness 2.65 mm
painted black with powder
maximum profile length 2 m

This type of display wall is made of smart clips combined with aluminum or steel pipes. Such a modular system allows you to create any model you want. Feel free to contact us for a customized quote!
Frame prices do not include rubber bands, hooks or exclusive print.

We offer frames with two sizes of tubes:
- D=42.4mm, pipe wall thickness 2.6 mm
- D=48.3mm, tube wall thickness 2.9 mm

When asking for a price quote, please note that the outer dimension of the banner frame = canvas size + 26 cm (only when using rubber bands or standard hooks)

This type of display wall is made of smart clips combined with aluminum or steel pipes. The TURIN display wall is attached to the plate legs, which gives the frame a more exclusive look.
The system allows you to create a wall of any desired size.
Feel free to contact us for a customized quote!
Frame prices do not include rubber bands, hooks or exclusive print.

We offer frames with two sizes of tubes:
- D=42.4mm, pipe wall thickness 2.6 mm
- D=48.3mm, tube wall thickness 2.9 mm

When asking for a price quote, please note that the outer dimension of the banner frame = canvas size + 26 cm (only when using rubber bands or standard hooks)

Hook twisted - 25 mm. Suited for making coat hangers and the like.
Suitable for square tube 25 x 25 mm