Type 34, Handrail support - 25x25 mm

Three-way elbow 90° - 25 mm. Angle connection clamp (90°) for corners of overheads and all other angled connections.

Angle of continuous upright - 25 mm. Corner connection (90°), where the vertical tube runs through the clamp.

Two Socket Cross - 25 mm. 90°- joint clamp between the middle rail and an upright on railings.

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.

Steel galvanized square 25x25 mm tube profile / socket of 2 mm thickness.
This profile has a standard trade length of 6 meters, but can always be cut to size for you.
Suitable for our square tubefittings.

The advantage of black color is that the color goes very deep into the material, which prevents the pipe from corroding too quickly.
The black tubes are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Maximum length for shipping with couriers is 2 meters!

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.