Type 44, Single Swivel, 40x40 mm

Angle clamp 90° - 25 mm, which is well suited for forming a 90° angle between a horizontal and a vertical pipe.

Long T-piece. This fitting can be used where a join is required in the horizontal tube.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.

A cross with four slots. A 4-way clamp used to attach uprights with 4 horizontal tubes perpendicular to each other. The standpipe passes through the clamp.
Suitable for square tube 40x40 mm

Male Single Lug. Also used for fixing panels and boards.
Suitable for square tube 40x40 mm

Female Single Socket. Often used together with other brackets, such as Type 36, 38, and 40. One part of swivel fitting, not generally used alone.