Categories

Type 49, Adjustable Side Outlet tee Ø48,3

SKU: NKL049E
Unit: pc
Qty: In Stock
Delivery time: 1-2 nädalat
Price:
9,10 €
price inc. tax 11,28 €
ATTENTION: The price is for one tube fitting. The figure shows a set of two fittings. Adjustable Swivel Tee. Always used in pairs to allow angle variation between 54 and 270 degrees. 608049B = 70° - 208° (min/max angle) 608049C = 71° - 217° (min/max angle) 608049D = 97° - 270° (min/max angle) 608049E = 54° - 215° (min/max angle)
Qty.: - +
   - or -   
Add to inquiry
Similar products
Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.
SKU: NKL251E ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
24,90 €
Square base plate. Use this tubefitting for positioning constructions. Due to the shape of the base plate, it can be fixed nicely on a surface at a 90° angle. Do not use it as a base for supporting safety railings or similar contructions.
SKU: NKL011E ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
11,00 €
Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.
SKU: NKL026E ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
25,10 €
Long Slope Tee - Variable angle 0° - 11°. Similar to Type 2SE. This fitting can be used where a join is required in the horizontal tube.
SKU: NKL004SE ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
22,50 €
Butt joint for sloping sites, adjustable from 11° to 29°, often used to join intermediate uprights to top rails and middle rails to end uprights. This Interclamp cannot be used where through tube (sloping in photo) has to be joined within the fitting.
SKU: NKL253E ,   Qty: In Stock
26,40 €
Metal cap for Ø42,4 mm tube
Color: black

Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.
SKU: NKL073E ,   Qty: In Stock
6,20 €