Type 747, DDA Assist Expanding Internal Swivel BracketØ48.3 mm

Add-on Side Outlet Tee. The same tube fitting as type 24, but this tube fitting can be placed on an existing construction by means of a foldable part on the vertical tube connector.

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Height: 1000mm
Width: 300mm
Depth: 300mm
Tube diameter: 48.3mm, wall thickness: 3.2mm
Powder coated yellow RAL1003

A banner frame made of smart clips, which is made according to the dimensions of the banner.
We offer frames with two sizes of tubes:
- D=42.4mm, pipe wall thickness 2.6 mm
- D=48.3mm, tube wall thickness 2.9 mm

Sample products are complete in 4 different variations:
With a 42.4mm diameter pipe and clamps, sizes 1000x1000m and 2000x2000mm (the price does not include the banner, hooks, elastics or fixing clamps.)
With 42.3mm diameter pipe and clamps, size 1000x1000m and 2000x2000mm (the price does not include banner, hooks, elastics or fixing clamps.)

The products with the given dimensions are presented for informational purposes. We can complete the frames according to your desired dimensions. To do this, fill out the inquiry basket form or write to us at info@tubex.ee
When asking for a price quote, please consider that the outer dimension of the banner frame = canvas size + 26 cm (only when using rubber bands or standard hooks)

Side Outlet Tee - 25 mm. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. The upright tube passes through the clamp.

Square footplate - 40 mm. Use this clamp for positioning constructions. Do not use as a basis for supporting safety railings and the like.