Cap cover for sign post AL Ø60/160 mm, white

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 100mm x 33 m
– orange-black print
– non-reflective

The installation sleeve is used for quick installation and removal of traffic signs in places where the post is often damaged, e.g. as a result of traffic accidents, turning of trucks, intentional damage or in places where signs are frequently changed.
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!

The Loob screw banding tool is used to tension stainless steel bands with widths of up to 20 mm in all steel grades offered by Loob. It is made of corrosion-resistant galvanized steel.
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,8mm
Dimensions: 220x300x60mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring

Fixing buckle for worm drive clamp bands
- 9,5 (3/8") mm
- G304
- suitable for the product: TSL9x06(30)G304

Mount for attaching a traffic mirror to the wall
Dimensions:
- length 150 mm
- tube height: 80 mm
- tube diameter: 76 mm
- distance between tube and wall: 70 mm
3 holes with a diameter of Ø10 mm