Steel ground sleeve 76 x 400mm

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 50mm x 33 m
– orange-black print
– non-reflective

One-sided traffic sign clip for attaching to a 60mm pipe.
One traffic sign requires 2 clips.

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

- Dimensions: 850x850x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 255 kg

NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051

Tool for tensioning and cutting stainless steel cable ties. Resistant to corrosion and oxidation. Ideally suited for Ball-lock ties made from various grades of stainless steel. The handle can be used to adjust the level of tension on the tie as needed, the built-in mechanism cuts off the excess section of the tie.
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm

Fixing buckle for worm drive clamp bands
- 9,5 (3/8") mm
- G304
- suitable for the product: TSL9x06(30)G304