Grill lamp 4x2W LED, 10-30V, amber

Dimensions: ø142x80mm
Voltage: 12-24V
Description: Yellow, Magnetic Mount, 8 Power LEDs, 11 Flashing Modes, SIG Ignition Plug, Low Profile
Description: ECE-R65 / -R10, height 80mm

Super thin 9mm
horizontal mount
amber leds (6)
transparent lens
23 different flashing alternatives with non-volatile memory function
max 15 flashers can be synchronized for simultaneous or alternating flash
solid aluminum housing: efficient heat dissipation and maximum durability
easy to install
self-contained: no external flasher
reverse polarity protection
max current: 1A@12VDC / 0,5A@24VDC
screw distance 102mm, weatherproof and vibration resistant design for external and internal use
ECE R65 (XA2); ECE R10; SAE J595 Class 1; CISPR 25 Class 2
IPX7, 0.5mm²
cables: 250mm

Amber beacon, clear glass, 3 EffectLEDs, 5 different flashing alternatives, several flashers can be synchronized together, surface mounting
12-24V
ECE R-65, IP67. screws 77mm apart

- 4x 1W LED x 8 modules, a total of 32 LEDs
- yellow light
- 20 flashing modes
- voltage: 12-24V
- 35W
- IP 65
- comes with a remote control
- Dimensions: 89 x 4.5 x 6.5 cm

LED (lm 1x58), 120 ° ≈ 20 cd, yellow, 1-sided
Light class L7
Battery: 1 or 2 batteries 4R25 6V (battery (s) must be ordered separately)
Operating time: 250 h (with 1 Ah battery), 500 (with 2 Ah battery)
With twilight sensor (100% white 30% in the dark)
Fastening: for fastening to a clamp, cone or pipe
Moisture-proof switch
Dimensions: Ø185 mm, 170x80x350 mm
Weight: 0.8 kg

8 MO102 lamps with a diameter of 10 cm, each lamp has 18 LEDs with a power of 1400 cd
the arrow can be permanently mounted to the rear of the vehicle using rubber pads or on magnets
dimensions: 60x60
12V power supply for the battery car
included two small round switches on the function on / off and day/night mode
The 60x10x8 arrow can be permanently mounted to the rear of the vehicle using rubber pads or magnets
- Dimensions: 60x60
- 12V power supply for car battery.
- Cable control
The light warning and signaling device has all the certificates in the field of:
- light - Class L2H
- effective time - Class O1
- continuity of the light emitted - Class F3
EN12352 L2H certificate