Hand stop sign

Site safety lamp - side mount.
The site lamp is tough, long-lasting and easy to install in a range of working environments. Suitable for all scaffolding, skip lugs, HERAS fencing and roadside barriers, as well as bolting onto flat surfaces.

- size: 120mm x 118mm x 95mm
- battery: 2 x AA ( not included)
- 1,500 hours performance
- dimmer switch
- 2 reziimi: flashing(1500h) and steady (750h)
- candela: 0.8 (flashing) / 0.95 (steady )
- protection class IP54
- BS EN 12352: 2006, L1
- LED yellow

Orange fencing not oriented net used to secure construction site perimeters, roadworks and sports events.
Extruded from polyolefin, it is highly visible.
Thanks to its anti UV treatment and its longitudinal traction resistance, it can support heavy weather conditions.

Weight: 8 kg
Height 1 m
Length 50 m

Manual light bar for security functions, signaling, beaconing, etc.
It is a bar with handle and various signaling functions.
Great visibility, especially at night, thanks to its high intensity light effects.
It has 2 functions: red lit bar and red blinking bar.
For the selection of the light functions, there is a button on the handle.
It works with 2 1.5V batteries (type C)

Hand Stop signal
- size: Ø220
- foil reflective class RA3

Durable ploughing stick made out of fiberglass.
Sharpened bottom end of the stick and top end with a cap.
20 cm reflective tape on the stick.
Set of 6 pcs

Folding sign holder

For quick securing and marking of construction sites.

- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg

The traffic sign is not included!