Handrail OP20

The OP1 handrail has smooth transitions and is designed for installation stairs and sidewalks.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP17 is a single inline handrail / mid & bottom rails for stairs and level applications under one metre (FFL) and typical fire stair applications.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP24 is top rail / handrail & bottom rail bikeway barrier with offset top rail, handrail and bottom rail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP27 is a single offset handrail / midrail & kerbrail for disabled ramps under one metre (FFL) with offset and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP5 safety barrier module.
As a standard solution, the barriers are hot-dip galvanized.